Il 25/11/24 22:20, Nícolas F. R. A. Prado ha scritto:
In order to get working interrupts, a low offset value needs to be
configured. The minimum value for it is 20 Celsius, which is what is
configured when there's no lower thermal trip (ie the thermal core
passes -INT_MAX as low trip temperature). However, when the temperature
gets that low and fluctuates around that value it causes an interrupt
storm.
Prevent that interrupt storm by not enabling the low offset interrupt if
the low threshold is the minimum one.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 77354eaef821 ("thermal/drivers/mediatek/lvts_thermal: Don't leave threshold zeroed")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
---
drivers/thermal/mediatek/lvts_thermal.c | 48 ++++++++++++++++++++++++---------
1 file changed, 35 insertions(+), 13 deletions(-)
diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index 6ac33030f015c7239e36d81018d1a6893cb69ef8..2271023f090df82fbdd0b5755bb34879e58b0533 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -67,10 +67,14 @@
#define LVTS_CALSCALE_CONF 0x300
#define LVTS_MONINT_CONF 0x0300318C
-#define LVTS_MONINT_OFFSET_SENSOR0 0xC
-#define LVTS_MONINT_OFFSET_SENSOR1 0x180
-#define LVTS_MONINT_OFFSET_SENSOR2 0x3000
-#define LVTS_MONINT_OFFSET_SENSOR3 0x3000000
+#define LVTS_MONINT_OFFSET_HIGH_SENSOR0 BIT(3)
Yeah it's longer, but that's more readable:
#define LVTS_MONINT_OFFSET_HIGH_INTEN_SENSOR0
...because what this BIT does is enabling the high offset interrupt for the
sensing point 0 (which in this driver we call sensor 0).
That name would make it (imo) way less likely to need any datasheet to understand
what is actually going on with that setting :-)
+#define LVTS_MONINT_OFFSET_HIGH_SENSOR1 BIT(8)
+#define LVTS_MONINT_OFFSET_HIGH_SENSOR2 BIT(13)
+#define LVTS_MONINT_OFFSET_HIGH_SENSOR3 BIT(25)
+#define LVTS_MONINT_OFFSET_LOW_SENSOR0 BIT(2)
Of course, the comment is valid for the LOW ones as well!
Everything else is good for me, and since it is just about simple renaming, I can
already give you my
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
+#define LVTS_MONINT_OFFSET_LOW_SENSOR1 BIT(7)
+#define LVTS_MONINT_OFFSET_LOW_SENSOR2 BIT(12)
+#define LVTS_MONINT_OFFSET_LOW_SENSOR3 BIT(24)
#define LVTS_INT_SENSOR0 0x0009001F
#define LVTS_INT_SENSOR1 0x001203E0
@@ -326,11 +330,17 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl)
{
- u32 masks[] = {
- LVTS_MONINT_OFFSET_SENSOR0,
- LVTS_MONINT_OFFSET_SENSOR1,
- LVTS_MONINT_OFFSET_SENSOR2,
- LVTS_MONINT_OFFSET_SENSOR3,
+ u32 high_offset_masks[] = {
+ LVTS_MONINT_OFFSET_HIGH_SENSOR0,
+ LVTS_MONINT_OFFSET_HIGH_SENSOR1,
+ LVTS_MONINT_OFFSET_HIGH_SENSOR2,
+ LVTS_MONINT_OFFSET_HIGH_SENSOR3,
+ };
+ u32 low_offset_masks[] = {
+ LVTS_MONINT_OFFSET_LOW_SENSOR0,
+ LVTS_MONINT_OFFSET_LOW_SENSOR1,
+ LVTS_MONINT_OFFSET_LOW_SENSOR2,
+ LVTS_MONINT_OFFSET_LOW_SENSOR3,
};
u32 value = 0;
int i;
@@ -339,10 +349,22 @@ static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl)
for (i = 0; i < ARRAY_SIZE(masks); i++) {
if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh
- && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh)
- value |= masks[i];
- else
- value &= ~masks[i];
+ && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) {
+ /*
+ * The minimum threshold needs to be configured in the
+ * OFFSETL register to get working interrupts, but we
+ * don't actually want to generate interrupts when
+ * crossing it.
+ */
+ if (lvts_ctrl->low_thresh == -INT_MAX) {
+ value &= ~low_offset_masks[i];
+ value |= high_offset_masks[i];
+ } else {
+ value |= low_offset_masks[i] | high_offset_masks[i];
+ }
+ } else {
+ value &= ~(low_offset_masks[i] | high_offset_masks[i]);
+ }
}
writel(value, LVTS_MONINT(lvts_ctrl->base));
