From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
On Tue, 05 Nov 2024 12:45:23 +0530, Sai Kumar Cholleti wrote:
> Setting GPIO direction = high, sometimes results in GPIO value = 0.
>
> If a GPIO is pulled high, the following construction results in the
> value being 0 when the desired value is 1:
>
> $ echo "high" > /sys/class/gpio/gpio336/direction
> $ cat /sys/class/gpio/gpio336/value
> 0
>
> [...]
Applied, thanks!
[1/1] gpio: exar: set value when external pull-up or pull-down is present
commit: 72cef64180de04a7b055b4773c138d78f4ebdb77
Best regards,
--
Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
