In commit b382380c0d2d ("can: m_can: Add hrtimer to generate software
interrupt") support for IRQ-less devices was added. Instead of an
interrupt, the interrupt routine is called by a hrtimer-based polling
loop.
That patch forgot to change free_irq() to be only called for devices
with IRQs. Fix this, by calling free_irq() conditionally only if an
IRQ is available for the device (and thus has been requested
previously).
Fixes: b382380c0d2d ("can: m_can: Add hrtimer to generate software interrupt")
Reviewed-by: Simon Horman <horms@xxxxxxxxxx>
Reviewed-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
Link: https://patch.msgid.link/20240930-m_can-cleanups-v1-1-001c579cdee4@xxxxxxxxxxxxxx
Cc: <stable@xxxxxxxxxxxxxxx> # v6.6+
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
drivers/net/can/m_can/m_can.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index a978b960f1f1..16e9e7d7527d 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1765,7 +1765,8 @@ static int m_can_close(struct net_device *dev)
netif_stop_queue(dev);
m_can_stop(dev);
- free_irq(dev->irq, dev);
+ if (dev->irq)
+ free_irq(dev->irq, dev);
m_can_clean(dev);
--
2.45.2
