From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> commit 5189df7b8088268012882c220d6aca4e64981348 upstream. The syzbot fuzzer has been encountering "task hung" problems ever since the dummy-hcd driver was changed to use hrtimers instead of regular timers. It turns out that the problems are caused by a subtle difference between the timer_pending() and hrtimer_active() APIs. The changeover blindly replaced the first by the second. However, timer_pending() returns True when the timer is queued but not when its callback is running, whereas hrtimer_active() returns True when the hrtimer is queued _or_ its callback is running. This difference occasionally caused dummy_urb_enqueue() to think that the callback routine had not yet started when in fact it was almost finished. As a result the hrtimer was not restarted, which made it impossible for the driver to dequeue later the URB that was just enqueued. This caused usb_kill_urb() to hang, and things got worse from there. Since hrtimers have no API for telling when they are queued and the callback isn't running, the driver must keep track of this for itself. That's what this patch does, adding a new "timer_pending" flag and setting or clearing it at the appropriate times. Reported-by: syzbot+f342ea16c9d06d80b585@xxxxxxxxxxxxxxxxxxxxxxxxx Closes: https://lore.kernel.org/linux-usb/6709234e.050a0220.3e960.0011.GAE@xxxxxxxxxx/ Tested-by: syzbot+f342ea16c9d06d80b585@xxxxxxxxxxxxxxxxxxxxxxxxx Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> Fixes: a7f3813e589f ("usb: gadget: dummy_hcd: Switch to hrtimer transfer scheduler") Cc: Marcello Sylvester Bauer <sylv@xxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Link: https://lore.kernel.org/r/2dab644e-ef87-4de8-ac9a-26f100b2c609@xxxxxxxxxxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Guilherme G. Piccoli <gpiccoli@xxxxxxxxxx> --- drivers/usb/gadget/udc/dummy_hcd.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index ff7bee78bcc4..d5d89fadde43 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -254,6 +254,7 @@ struct dummy_hcd { u32 stream_en_ep; u8 num_stream[30 / 2]; + unsigned timer_pending:1; unsigned active:1; unsigned old_active:1; unsigned resuming:1; @@ -1303,9 +1304,11 @@ static int dummy_urb_enqueue( urb->error_count = 1; /* mark as a new urb */ /* kick the scheduler, it'll do the rest */ - if (!hrtimer_active(&dum_hcd->timer)) + if (!dum_hcd->timer_pending) { + dum_hcd->timer_pending = 1; hrtimer_start(&dum_hcd->timer, ns_to_ktime(DUMMY_TIMER_INT_NSECS), HRTIMER_MODE_REL_SOFT); + } done: spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); @@ -1324,9 +1327,10 @@ static int dummy_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) spin_lock_irqsave(&dum_hcd->dum->lock, flags); rc = usb_hcd_check_unlink_urb(hcd, urb, status); - if (!rc && dum_hcd->rh_state != DUMMY_RH_RUNNING && - !list_empty(&dum_hcd->urbp_list)) + if (rc == 0 && !dum_hcd->timer_pending) { + dum_hcd->timer_pending = 1; hrtimer_start(&dum_hcd->timer, ns_to_ktime(0), HRTIMER_MODE_REL_SOFT); + } spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); return rc; @@ -1813,6 +1817,7 @@ static enum hrtimer_restart dummy_timer(struct hrtimer *t) /* look at each urb queued by the host side driver */ spin_lock_irqsave(&dum->lock, flags); + dum_hcd->timer_pending = 0; if (!dum_hcd->udev) { dev_err(dummy_dev(dum_hcd), @@ -1994,8 +1999,10 @@ static enum hrtimer_restart dummy_timer(struct hrtimer *t) if (list_empty(&dum_hcd->urbp_list)) { usb_put_dev(dum_hcd->udev); dum_hcd->udev = NULL; - } else if (dum_hcd->rh_state == DUMMY_RH_RUNNING) { + } else if (!dum_hcd->timer_pending && + dum_hcd->rh_state == DUMMY_RH_RUNNING) { /* want a 1 msec delay here */ + dum_hcd->timer_pending = 1; hrtimer_start(&dum_hcd->timer, ns_to_ktime(DUMMY_TIMER_INT_NSECS), HRTIMER_MODE_REL_SOFT); } @@ -2390,8 +2397,10 @@ static int dummy_bus_resume(struct usb_hcd *hcd) } else { dum_hcd->rh_state = DUMMY_RH_RUNNING; set_link_state(dum_hcd); - if (!list_empty(&dum_hcd->urbp_list)) + if (!list_empty(&dum_hcd->urbp_list)) { + dum_hcd->timer_pending = 1; hrtimer_start(&dum_hcd->timer, ns_to_ktime(0), HRTIMER_MODE_REL_SOFT); + } hcd->state = HC_STATE_RUNNING; } spin_unlock_irq(&dum_hcd->dum->lock); @@ -2522,6 +2531,7 @@ static void dummy_stop(struct usb_hcd *hcd) struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); hrtimer_cancel(&dum_hcd->timer); + dum_hcd->timer_pending = 0; device_remove_file(dummy_dev(dum_hcd), &dev_attr_urbs); dev_info(dummy_dev(dum_hcd), "stopped\n"); } -- 2.46.2
