From: Zijun Hu <quic_zijuhu@xxxxxxxxxxx> Commit 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on exit") will cause that usb phy @glue->xceiv is accessed after released. 1) register platform driver @sunxi_musb_driver // get the usb phy @glue->xceiv sunxi_musb_probe() -> devm_usb_get_phy(). 2) register and unregister platform driver @musb_driver musb_probe() -> sunxi_musb_init() use the phy here //the phy is released here musb_remove() -> sunxi_musb_exit() -> devm_usb_put_phy() 3) register @musb_driver again musb_probe() -> sunxi_musb_init() use the phy here but the phy has been released at 2). ... Fixed by reverting the commit, namely, removing devm_usb_put_phy() from sunxi_musb_exit(). Fixes: 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on exit") Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Zijun Hu <quic_zijuhu@xxxxxxxxxxx> --- drivers/usb/musb/sunxi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index d54283fd026b..05b6e7e52e02 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -293,8 +293,6 @@ static int sunxi_musb_exit(struct musb *musb) if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) sunxi_sram_release(musb->controller->parent); - devm_usb_put_phy(glue->dev, glue->xceiv); - return 0; } --- base-commit: afb92ad8733ef0a2843cc229e4d96aead80bc429 change-id: 20241029-sunxi_fix-07fe18228733 Best regards, -- Zijun Hu <quic_zijuhu@xxxxxxxxxxx>