From: Kenneth Albanowski <kenalba@xxxxxxxxxxxx>
[ Upstream commit 526748b925185e95f1415900ee13c2469d4b64cc ]
The Logitech Casa Touchpad does not reliably send touch release signals
when communicating through the Logitech Bolt wireless-to-USB receiver.
Adjusting the device class to add MT_QUIRK_NOT_SEEN_MEANS_UP to make
sure that no touches become stuck, MT_QUIRK_FORCE_MULTI_INPUT is not
needed, but harmless.
Linux does not have information on which devices are connected to the
Bolt receiver, so we have to enable this for the entire device.
Signed-off-by: Kenneth Albanowski <kenalba@xxxxxxxxxxxx>
Signed-off-by: Jiri Kosina <jkosina@xxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-multitouch.c | 4 ++++
2 files changed, 5 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index f3b183a7b7fa4..f1c106f5e90b9 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -859,6 +859,7 @@
#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1 0xc539
#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1 0xc53f
#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY 0xc53a
+#define USB_DEVICE_ID_LOGITECH_BOLT_RECEIVER 0xc548
#define USB_DEVICE_ID_SPACETRAVELLER 0xc623
#define USB_DEVICE_ID_SPACENAVIGATOR 0xc626
#define USB_DEVICE_ID_DINOVO_DESKTOP 0xc704
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index e7199ae2e3d91..8800893b098bf 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -2131,6 +2131,10 @@ static const struct hid_device_id mt_devices[] = {
HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_MULTITOUCH_WIN_8,
USB_VENDOR_ID_LOGITECH,
USB_DEVICE_ID_LOGITECH_CASA_TOUCHPAD) },
+ { .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU,
+ HID_DEVICE(BUS_USB, HID_GROUP_MULTITOUCH_WIN_8,
+ USB_VENDOR_ID_LOGITECH,
+ USB_DEVICE_ID_LOGITECH_BOLT_RECEIVER) },
/* MosArt panels */
{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
--
2.43.0
