From: Bartłomiej Maryńczak <marynczakbartlomiej@xxxxxxxxx>
[ Upstream commit 293c485cbac2607595fdaae2b1fb390fc7b2d014 ]
Patch for Goodix 27c6:0d42 touchpads found in Inspiron 5515 laptops.
After resume from suspend, one can communicate with this device just fine.
We can read data from it or request a reset,
but for some reason the interrupt line will not go up
when new events are available.
(it can correctly respond to a reset with an interrupt tho)
The only way I found to wake this device up
is to send anything to it after ~1.5s mark,
for example a simple read request, or power mode change.
In this patch, I simply delay the resume steps with msleep,
this will cause the set_power request to happen after
the ~1.5s barrier causing the device to resume its event interrupts.
Sleep was used rather than delayed_work
to make this workaround as non-invasive as possible.
[jkosina@xxxxxxxx: shortlog update]
Signed-off-by: Bartłomiej Maryńczak <marynczakbartlomiej@xxxxxxxxx>
Signed-off-by: Jiri Kosina <jkosina@xxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/hid/hid-ids.h | 1 +
drivers/hid/i2c-hid/i2c-hid-core.c | 10 ++++++++++
2 files changed, 11 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 8a991b30e3c6d..25f96494700d8 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -509,6 +509,7 @@
#define I2C_DEVICE_ID_GOODIX_01E8 0x01e8
#define I2C_DEVICE_ID_GOODIX_01E9 0x01e9
#define I2C_DEVICE_ID_GOODIX_01F0 0x01f0
+#define I2C_DEVICE_ID_GOODIX_0D42 0x0d42
#define USB_VENDOR_ID_GOODTOUCH 0x1aad
#define USB_DEVICE_ID_GOODTOUCH_000f 0x000f
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 2f8a9d3f1e861..8914c7db94718 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -50,6 +50,7 @@
#define I2C_HID_QUIRK_BAD_INPUT_SIZE BIT(3)
#define I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET BIT(4)
#define I2C_HID_QUIRK_NO_SLEEP_ON_SUSPEND BIT(5)
+#define I2C_HID_QUIRK_DELAY_WAKEUP_AFTER_RESUME BIT(6)
/* Command opcodes */
#define I2C_HID_OPCODE_RESET 0x01
@@ -140,6 +141,8 @@ static const struct i2c_hid_quirks {
{ USB_VENDOR_ID_ELAN, HID_ANY_ID,
I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET |
I2C_HID_QUIRK_BOGUS_IRQ },
+ { I2C_VENDOR_ID_GOODIX, I2C_DEVICE_ID_GOODIX_0D42,
+ I2C_HID_QUIRK_DELAY_WAKEUP_AFTER_RESUME },
{ 0, 0 }
};
@@ -981,6 +984,13 @@ static int i2c_hid_core_resume(struct i2c_hid *ihid)
return -ENXIO;
}
+ /* On Goodix 27c6:0d42 wait extra time before device wakeup.
+ * It's not clear why but if we send wakeup too early, the device will
+ * never trigger input interrupts.
+ */
+ if (ihid->quirks & I2C_HID_QUIRK_DELAY_WAKEUP_AFTER_RESUME)
+ msleep(1500);
+
/* Instead of resetting device, simply powers the device on. This
* solves "incomplete reports" on Raydium devices 2386:3118 and
* 2386:4B33 and fixes various SIS touchscreens no longer sending
--
2.43.0
