From: Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx> [ Upstream commit 6e38a7e098d32d128b00b42a536151de9ea1340b ] When a PCM is restarted after a snd_pcm_drain/snd_pcm_drop(), the prepare callback will be invoked and the hw_params will be set again. For the HDA DAI's, the hw_params function handles this case already but not for the non-HDA DAI's. So, add the check for link_prepared to verify if the hw_params should be done again or not. Additionally, for SDW DAI's reset the PCMSyCM registers as would be done in the case of a start after a hw_free. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@xxxxxxxxxxxxxxx> Reviewed-by: Kai Vehmanen <kai.vehmanen@xxxxxxxxxxxxxxx> Signed-off-by: Bard Liao <yung-chuan.liao@xxxxxxxxxxxxxxx> All: stable@xxxxxxxxxxxxxxx # 6.10.x 6.11.x Link: https://patch.msgid.link/20241016032910.14601-3-yung-chuan.liao@xxxxxxxxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- sound/soc/sof/intel/hda-dai.c | 36 +++++++++++++++++++++++++++++++---- 1 file changed, 32 insertions(+), 4 deletions(-) diff --git a/sound/soc/sof/intel/hda-dai.c b/sound/soc/sof/intel/hda-dai.c index 1c823f9eea570..8cccf38967e72 100644 --- a/sound/soc/sof/intel/hda-dai.c +++ b/sound/soc/sof/intel/hda-dai.c @@ -370,6 +370,13 @@ static int non_hda_dai_hw_params_data(struct snd_pcm_substream *substream, return -EINVAL; } + sdev = widget_to_sdev(w); + hext_stream = ops->get_hext_stream(sdev, cpu_dai, substream); + + /* nothing more to do if the link is already prepared */ + if (hext_stream && hext_stream->link_prepared) + return 0; + /* use HDaudio stream handling */ ret = hda_dai_hw_params_data(substream, params, cpu_dai, data, flags); if (ret < 0) { @@ -377,7 +384,6 @@ static int non_hda_dai_hw_params_data(struct snd_pcm_substream *substream, return ret; } - sdev = widget_to_sdev(w); if (sdev->dspless_mode_selected) return 0; @@ -482,6 +488,31 @@ int sdw_hda_dai_hw_params(struct snd_pcm_substream *substream, int ret; int i; + ops = hda_dai_get_ops(substream, cpu_dai); + if (!ops) { + dev_err(cpu_dai->dev, "DAI widget ops not set\n"); + return -EINVAL; + } + + sdev = widget_to_sdev(w); + hext_stream = ops->get_hext_stream(sdev, cpu_dai, substream); + + /* nothing more to do if the link is already prepared */ + if (hext_stream && hext_stream->link_prepared) + return 0; + + /* + * reset the PCMSyCM registers to handle a prepare callback when the PCM is restarted + * due to xruns or after a call to snd_pcm_drain/drop() + */ + ret = hdac_bus_eml_sdw_map_stream_ch(sof_to_bus(sdev), link_id, cpu_dai->id, + 0, 0, substream->stream); + if (ret < 0) { + dev_err(cpu_dai->dev, "%s: hdac_bus_eml_sdw_map_stream_ch failed %d\n", + __func__, ret); + return ret; + } + data.dai_index = (link_id << 8) | cpu_dai->id; data.dai_node_id = intel_alh_id; ret = non_hda_dai_hw_params_data(substream, params, cpu_dai, &data, flags); @@ -490,10 +521,7 @@ int sdw_hda_dai_hw_params(struct snd_pcm_substream *substream, return ret; } - ops = hda_dai_get_ops(substream, cpu_dai); - sdev = widget_to_sdev(w); hext_stream = ops->get_hext_stream(sdev, cpu_dai, substream); - if (!hext_stream) return -ENODEV; -- 2.43.0
