[PATCH 3.18 25/57] i2c: s3c2410: fix ABBA deadlock by keeping clock prepared

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Osmialowski <p.osmialowsk@xxxxxxxxxxx>

commit 34e81ad5f0b60007c95995eb7803da7e00c6c611 upstream.

This patch solves deadlock between clock prepare mutex and regmap mutex reported
by Tomasz Figa in [1] by implementing solution from [2]: "always leave the clock
of the i2c controller in a prepared state".

[1] https://lkml.org/lkml/2014/7/2/171
[2] https://lkml.org/lkml/2014/7/2/207

On each i2c transfer handled by s3c24xx_i2c_xfer(), clk_prepare_enable() was
called, which calls clk_prepare() then clk_enable(). clk_prepare() takes
prepare_lock mutex before proceeding. Note that i2c transfer functions are
invoked from many places in kernel, typically with some other additional lock
held.

It may happen that function on CPU1 (e.g. regmap_update_bits()) has taken a
mutex (i.e. regmap lock mutex) then it attempts i2c communication in order to
proceed (so it needs to obtain clock related prepare_lock mutex during transfer
preparation stage due to clk_prepare() call). At the same time other task on
CPU0 wants to operate on clock (e.g. to (un)prepare clock for some other reason)
so it has taken prepare_lock mutex.

CPU0:                        CPU1:
clk_disable_unused()         regulator_disable()
  clk_prepare_lock()           map->lock(map->lock_arg)
  regmap_read()                s3c24xx_i2c_xfer()
    map->lock(map->lock_arg)     clk_prepare_lock()

Implemented solution from [2] leaves i2c clock prepared. Preparation is done in
s3c24xx_i2c_probe() function. Without this patch, it is immediately unprepared
by clk_disable_unprepare() call. I've replaced this call with clk_disable() and
I've added clk_unprepare() call in s3c24xx_i2c_remove().

The s3c24xx_i2c_xfer() function now uses clk_enable() instead of
clk_prepare_enable() (and clk_disable() instead of clk_unprepare_disable()).

Signed-off-by: Paul Osmialowski <p.osmialowsk@xxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/i2c/busses/i2c-s3c2410.c |   23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -778,14 +778,16 @@ static int s3c24xx_i2c_xfer(struct i2c_a
 	int ret;
 
 	pm_runtime_get_sync(&adap->dev);
-	clk_prepare_enable(i2c->clk);
+	ret = clk_enable(i2c->clk);
+	if (ret)
+		return ret;
 
 	for (retry = 0; retry < adap->retries; retry++) {
 
 		ret = s3c24xx_i2c_doxfer(i2c, msgs, num);
 
 		if (ret != -EAGAIN) {
-			clk_disable_unprepare(i2c->clk);
+			clk_disable(i2c->clk);
 			pm_runtime_put(&adap->dev);
 			return ret;
 		}
@@ -795,7 +797,7 @@ static int s3c24xx_i2c_xfer(struct i2c_a
 		udelay(100);
 	}
 
-	clk_disable_unprepare(i2c->clk);
+	clk_disable(i2c->clk);
 	pm_runtime_put(&adap->dev);
 	return -EREMOTEIO;
 }
@@ -1174,7 +1176,7 @@ static int s3c24xx_i2c_probe(struct plat
 
 	clk_prepare_enable(i2c->clk);
 	ret = s3c24xx_i2c_init(i2c);
-	clk_disable_unprepare(i2c->clk);
+	clk_disable(i2c->clk);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "I2C controller init failed\n");
 		return ret;
@@ -1187,6 +1189,7 @@ static int s3c24xx_i2c_probe(struct plat
 		i2c->irq = ret = platform_get_irq(pdev, 0);
 		if (ret <= 0) {
 			dev_err(&pdev->dev, "cannot find IRQ\n");
+			clk_unprepare(i2c->clk);
 			return ret;
 		}
 
@@ -1195,6 +1198,7 @@ static int s3c24xx_i2c_probe(struct plat
 
 		if (ret != 0) {
 			dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
+			clk_unprepare(i2c->clk);
 			return ret;
 		}
 	}
@@ -1202,6 +1206,7 @@ static int s3c24xx_i2c_probe(struct plat
 	ret = s3c24xx_i2c_register_cpufreq(i2c);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
+		clk_unprepare(i2c->clk);
 		return ret;
 	}
 
@@ -1218,6 +1223,7 @@ static int s3c24xx_i2c_probe(struct plat
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to add bus to i2c core\n");
 		s3c24xx_i2c_deregister_cpufreq(i2c);
+		clk_unprepare(i2c->clk);
 		return ret;
 	}
 
@@ -1239,6 +1245,8 @@ static int s3c24xx_i2c_remove(struct pla
 {
 	struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
 
+	clk_unprepare(i2c->clk);
+
 	pm_runtime_disable(&i2c->adap.dev);
 	pm_runtime_disable(&pdev->dev);
 
@@ -1267,10 +1275,13 @@ static int s3c24xx_i2c_resume_noirq(stru
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
+	int ret;
 
-	clk_prepare_enable(i2c->clk);
+	ret = clk_enable(i2c->clk);
+	if (ret)
+		return ret;
 	s3c24xx_i2c_init(i2c);
-	clk_disable_unprepare(i2c->clk);
+	clk_disable(i2c->clk);
 	i2c->suspended = 0;
 
 	return 0;


--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]