Hi Tommy, On Tue, Oct 22, 2024 at 02:42:08AM +0000, Tommy Huang wrote: > Hi Andrew, > > Thanks for your comments. > I want to fix the situation when our controller is set as target mode and reading / writing by other i2c host. > However, this host is stopped by any other reason (DC on/off..etc). > It will cause the controller is stuck in this situation. > But I find it might not have clear hints to identify this situation is normal or abnormal. > So, this patch should not be applied into mainstream. Please, avoid top posting, I don't understand which part of the original message you are trying to comment on. Second thing, please, before sending a patch, always always always make sure that checkpatch.pl reports '0' errors and '0' warnings, except for few sporadic cases. Andi
