5.15-stable review patch. If anyone has any objections, please let me know. ------------------ From: Dinh Nguyen <dinguyen@xxxxxxxxxx> [ Upstream commit f7824ded41491d7ebc156a3a2f6fa05cd89da7c2 ] Add support for version 3.80a of the Synopsys DDR controller. This version of the controller has the following differences: - UE/CE are auto cleared - Interrupts are supported by default Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxx> Signed-off-by: Borislav Petkov <bp@xxxxxxx> Reviewed-by: Michal Simek <michal.simek@xxxxxxxxxx> Link: https://lkml.kernel.org/r/20211012190709.1504152-2-dinguyen@xxxxxxxxxx Stable-dep-of: 35e6dbfe1846 ("EDAC/synopsys: Fix error injection on Zynq UltraScale+") Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/edac/synopsys_edac.c | 49 ++++++++++++++++++++++++++++++------ 1 file changed, 42 insertions(+), 7 deletions(-) diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c index 8557781bb8dce..40b1abeca8562 100644 --- a/drivers/edac/synopsys_edac.c +++ b/drivers/edac/synopsys_edac.c @@ -101,6 +101,7 @@ /* DDR ECC Quirks */ #define DDR_ECC_INTR_SUPPORT BIT(0) #define DDR_ECC_DATA_POISON_SUPPORT BIT(1) +#define DDR_ECC_INTR_SELF_CLEAR BIT(2) /* ZynqMP Enhanced DDR memory controller registers that are relevant to ECC */ /* ECC Configuration Registers */ @@ -176,6 +177,10 @@ #define DDR_QOS_IRQ_EN_OFST 0x20208 #define DDR_QOS_IRQ_DB_OFST 0x2020C +/* DDR QOS Interrupt register definitions */ +#define DDR_UE_MASK BIT(9) +#define DDR_CE_MASK BIT(8) + /* ECC Corrected Error Register Mask and Shifts*/ #define ECC_CEADDR0_RW_MASK 0x3FFFF #define ECC_CEADDR0_RNK_MASK BIT(24) @@ -539,10 +544,16 @@ static irqreturn_t intr_handler(int irq, void *dev_id) priv = mci->pvt_info; p_data = priv->p_data; - regval = readl(priv->baseaddr + DDR_QOS_IRQ_STAT_OFST); - regval &= (DDR_QOSCE_MASK | DDR_QOSUE_MASK); - if (!(regval & ECC_CE_UE_INTR_MASK)) - return IRQ_NONE; + /* + * v3.0 of the controller has the ce/ue bits cleared automatically, + * so this condition does not apply. + */ + if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)) { + regval = readl(priv->baseaddr + DDR_QOS_IRQ_STAT_OFST); + regval &= (DDR_QOSCE_MASK | DDR_QOSUE_MASK); + if (!(regval & ECC_CE_UE_INTR_MASK)) + return IRQ_NONE; + } status = p_data->get_error_info(priv); if (status) @@ -554,7 +565,9 @@ static irqreturn_t intr_handler(int irq, void *dev_id) edac_dbg(3, "Total error count CE %d UE %d\n", priv->ce_cnt, priv->ue_cnt); - writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST); + /* v3.0 of the controller does not have this register */ + if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)) + writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST); return IRQ_HANDLED; } @@ -840,8 +853,13 @@ static void mc_init(struct mem_ctl_info *mci, struct platform_device *pdev) static void enable_intr(struct synps_edac_priv *priv) { /* Enable UE/CE Interrupts */ - writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK, - priv->baseaddr + DDR_QOS_IRQ_EN_OFST); + if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR) + writel(DDR_UE_MASK | DDR_CE_MASK, + priv->baseaddr + ECC_CLR_OFST); + else + writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK, + priv->baseaddr + DDR_QOS_IRQ_EN_OFST); + } static void disable_intr(struct synps_edac_priv *priv) @@ -896,6 +914,19 @@ static const struct synps_platform_data zynqmp_edac_def = { ), }; +static const struct synps_platform_data synopsys_edac_def = { + .get_error_info = zynqmp_get_error_info, + .get_mtype = zynqmp_get_mtype, + .get_dtype = zynqmp_get_dtype, + .get_ecc_state = zynqmp_get_ecc_state, + .quirks = (DDR_ECC_INTR_SUPPORT | DDR_ECC_INTR_SELF_CLEAR +#ifdef CONFIG_EDAC_DEBUG + | DDR_ECC_DATA_POISON_SUPPORT +#endif + ), +}; + + static const struct of_device_id synps_edac_match[] = { { .compatible = "xlnx,zynq-ddrc-a05", @@ -905,6 +936,10 @@ static const struct of_device_id synps_edac_match[] = { .compatible = "xlnx,zynqmp-ddrc-2.40a", .data = (void *)&zynqmp_edac_def }, + { + .compatible = "snps,ddrc-3.80a", + .data = (void *)&synopsys_edac_def + }, { /* end of table */ } -- 2.43.0
