[PATCH v6 5/8] clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The pipediv2_clk's source from the same mux as pipe clock. So they have
same limitation, which is that the PHY sequence requires to enable these
local CBCs before the PHY is actually outputting a clock to them. This
means the clock won't actually turn on when we vote them. Hence, let's
skip the halt bit check of the pipediv2_clk, otherwise pipediv2_clk may
stuck at off state during bootup.

Cc: stable@xxxxxxxxxxxxxxx
Fixes: 161b7c401f4b ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
Suggested-by: Mike Tipton <quic_mdtipton@xxxxxxxxxxx>
Signed-off-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konradybcio@xxxxxxxxxx>
Reviewed-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
 drivers/clk/qcom/gcc-x1e80100.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/qcom/gcc-x1e80100.c b/drivers/clk/qcom/gcc-x1e80100.c
index 0f578771071f..81ba5ceab342 100644
--- a/drivers/clk/qcom/gcc-x1e80100.c
+++ b/drivers/clk/qcom/gcc-x1e80100.c
@@ -3123,7 +3123,7 @@ static struct clk_branch gcc_pcie_3_pipe_clk = {
 
 static struct clk_branch gcc_pcie_3_pipediv2_clk = {
 	.halt_reg = 0x58060,
-	.halt_check = BRANCH_HALT_VOTED,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x52020,
 		.enable_mask = BIT(5),
@@ -3248,7 +3248,7 @@ static struct clk_branch gcc_pcie_4_pipe_clk = {
 
 static struct clk_branch gcc_pcie_4_pipediv2_clk = {
 	.halt_reg = 0x6b054,
-	.halt_check = BRANCH_HALT_VOTED,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x52010,
 		.enable_mask = BIT(27),
@@ -3373,7 +3373,7 @@ static struct clk_branch gcc_pcie_5_pipe_clk = {
 
 static struct clk_branch gcc_pcie_5_pipediv2_clk = {
 	.halt_reg = 0x2f054,
-	.halt_check = BRANCH_HALT_VOTED,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x52018,
 		.enable_mask = BIT(19),
@@ -3511,7 +3511,7 @@ static struct clk_branch gcc_pcie_6a_pipe_clk = {
 
 static struct clk_branch gcc_pcie_6a_pipediv2_clk = {
 	.halt_reg = 0x31060,
-	.halt_check = BRANCH_HALT_VOTED,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x52018,
 		.enable_mask = BIT(28),
@@ -3649,7 +3649,7 @@ static struct clk_branch gcc_pcie_6b_pipe_clk = {
 
 static struct clk_branch gcc_pcie_6b_pipediv2_clk = {
 	.halt_reg = 0x8d060,
-	.halt_check = BRANCH_HALT_VOTED,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x52010,
 		.enable_mask = BIT(28),
-- 
2.34.1





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux