[PATCH net v1 1] net: macb: Avoid 20s boot delay by skipping MDIO bus registration for fixed-link PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A boot delay was introduced by commit 79540d133ed6 ("net: macb: Fix
handling of fixed-link node"). This delay was caused by the call to
`mdiobus_register()` in cases where a fixed-link PHY was present. The
MDIO bus registration triggered unnecessary PHY address scans, leading
to a 20-second delay due to attempts to detect Clause 45 (C45)
compatible PHYs, despite no MDIO bus being attached.

The commit 79540d133ed6 ("net: macb: Fix handling of fixed-link node")
was originally introduced to fix a regression caused by commit
7897b071ac3b4 ("net: macb: convert to phylink"), which caused the driver
to misinterpret fixed-link nodes as PHY nodes. This resulted in warnings
like:
mdio_bus f0028000.ethernet-ffffffff: fixed-link has invalid PHY address
mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 0
...
mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 31

This patch reworks the logic to avoid registering and allocation of the
MDIO bus when:
  - The device tree contains a fixed-link node.
  - There is no "mdio" child node in the device tree.

If a child node named "mdio" exists, the MDIO bus will be registered to
support PHYs  attached to the MACB's MDIO bus. Otherwise, with only a
fixed-link, the MDIO bus is skipped.

Tested on a sama5d35 based system with a ksz8863 switch attached to
macb0.

Fixes: 79540d133ed6 ("net: macb: Fix handling of fixed-link node")
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
 drivers/net/ethernet/cadence/macb_main.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index f06babec04a0b..e4ee55bc53ba7 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -930,9 +930,6 @@ static int macb_mdiobus_register(struct macb *bp)
 		return ret;
 	}

-	if (of_phy_is_fixed_link(np))
-		return mdiobus_register(bp->mii_bus);
-
 	/* Only create the PHY from the device tree if at least one PHY is
 	 * described. Otherwise scan the entire MDIO bus. We do this to support
 	 * old device tree that did not follow the best practices and did not
@@ -953,8 +950,19 @@ static int macb_mdiobus_register(struct macb *bp)

 static int macb_mii_init(struct macb *bp)
 {
+	struct device_node *child, *np = bp->pdev->dev.of_node;
 	int err = -ENXIO;

+	/* With fixed-link, we don't need to register the MDIO bus,
+	 * except if we have a child named "mdio" in the device tree.
+	 * In that case, some PHYs may be attached to the MACB's MDIO bus.
+	 */
+	child = of_get_child_by_name(np, "mdio");
+	if (child)
+		of_node_put(child);
+	else if (of_phy_is_fixed_link(np))
+		return macb_mii_probe(bp->dev);
+
 	/* Enable management port */
 	macb_writel(bp, NCR, MACB_BIT(MPE));

--
2.39.5





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux