6.10-stable review patch. If anyone has any objections, please let me know. ------------------ From: Stefan Mätje <stefan.maetje@xxxxxx> [ Upstream commit 2423cc20087ae9a7b7af575aa62304ef67cad7b6 ] This patch moves the evaluation of data[IFLA_CAN_CTRLMODE] in function can_changelink in front of the evaluation of data[IFLA_CAN_BITTIMING]. This avoids a call to do_set_data_bittiming providing a stale can_priv::ctrlmode with a CAN_CTRLMODE_FD flag not matching the requested state when switching between a CAN Classic and CAN-FD bitrate. In the same manner the evaluation of data[IFLA_CAN_CTRLMODE] in function can_validate is also moved in front of the evaluation of data[IFLA_CAN_BITTIMING]. This is a preparation for patches where the nominal and data bittiming may have interdependencies on the driver side depending on the CAN_CTRLMODE_FD flag state. Signed-off-by: Stefan Mätje <stefan.maetje@xxxxxx> Link: https://patch.msgid.link/20240808164224.213522-1-stefan.maetje@xxxxxx Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/net/can/dev/netlink.c | 102 +++++++++++++++++----------------- 1 file changed, 51 insertions(+), 51 deletions(-) diff --git a/drivers/net/can/dev/netlink.c b/drivers/net/can/dev/netlink.c index dfdc039d92a6c..01aacdcda2606 100644 --- a/drivers/net/can/dev/netlink.c +++ b/drivers/net/can/dev/netlink.c @@ -65,15 +65,6 @@ static int can_validate(struct nlattr *tb[], struct nlattr *data[], if (!data) return 0; - if (data[IFLA_CAN_BITTIMING]) { - struct can_bittiming bt; - - memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt)); - err = can_validate_bittiming(&bt, extack); - if (err) - return err; - } - if (data[IFLA_CAN_CTRLMODE]) { struct can_ctrlmode *cm = nla_data(data[IFLA_CAN_CTRLMODE]); u32 tdc_flags = cm->flags & CAN_CTRLMODE_TDC_MASK; @@ -114,6 +105,15 @@ static int can_validate(struct nlattr *tb[], struct nlattr *data[], } } + if (data[IFLA_CAN_BITTIMING]) { + struct can_bittiming bt; + + memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt)); + err = can_validate_bittiming(&bt, extack); + if (err) + return err; + } + if (is_can_fd) { if (!data[IFLA_CAN_BITTIMING] || !data[IFLA_CAN_DATA_BITTIMING]) return -EOPNOTSUPP; @@ -195,48 +195,6 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[], /* We need synchronization with dev->stop() */ ASSERT_RTNL(); - if (data[IFLA_CAN_BITTIMING]) { - struct can_bittiming bt; - - /* Do not allow changing bittiming while running */ - if (dev->flags & IFF_UP) - return -EBUSY; - - /* Calculate bittiming parameters based on - * bittiming_const if set, otherwise pass bitrate - * directly via do_set_bitrate(). Bail out if neither - * is given. - */ - if (!priv->bittiming_const && !priv->do_set_bittiming && - !priv->bitrate_const) - return -EOPNOTSUPP; - - memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt)); - err = can_get_bittiming(dev, &bt, - priv->bittiming_const, - priv->bitrate_const, - priv->bitrate_const_cnt, - extack); - if (err) - return err; - - if (priv->bitrate_max && bt.bitrate > priv->bitrate_max) { - NL_SET_ERR_MSG_FMT(extack, - "arbitration bitrate %u bps surpasses transceiver capabilities of %u bps", - bt.bitrate, priv->bitrate_max); - return -EINVAL; - } - - memcpy(&priv->bittiming, &bt, sizeof(bt)); - - if (priv->do_set_bittiming) { - /* Finally, set the bit-timing registers */ - err = priv->do_set_bittiming(dev); - if (err) - return err; - } - } - if (data[IFLA_CAN_CTRLMODE]) { struct can_ctrlmode *cm; u32 ctrlstatic; @@ -284,6 +242,48 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[], priv->ctrlmode &= cm->flags | ~CAN_CTRLMODE_TDC_MASK; } + if (data[IFLA_CAN_BITTIMING]) { + struct can_bittiming bt; + + /* Do not allow changing bittiming while running */ + if (dev->flags & IFF_UP) + return -EBUSY; + + /* Calculate bittiming parameters based on + * bittiming_const if set, otherwise pass bitrate + * directly via do_set_bitrate(). Bail out if neither + * is given. + */ + if (!priv->bittiming_const && !priv->do_set_bittiming && + !priv->bitrate_const) + return -EOPNOTSUPP; + + memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt)); + err = can_get_bittiming(dev, &bt, + priv->bittiming_const, + priv->bitrate_const, + priv->bitrate_const_cnt, + extack); + if (err) + return err; + + if (priv->bitrate_max && bt.bitrate > priv->bitrate_max) { + NL_SET_ERR_MSG_FMT(extack, + "arbitration bitrate %u bps surpasses transceiver capabilities of %u bps", + bt.bitrate, priv->bitrate_max); + return -EINVAL; + } + + memcpy(&priv->bittiming, &bt, sizeof(bt)); + + if (priv->do_set_bittiming) { + /* Finally, set the bit-timing registers */ + err = priv->do_set_bittiming(dev); + if (err) + return err; + } + } + if (data[IFLA_CAN_RESTART_MS]) { /* Do not allow changing restart delay while running */ if (dev->flags & IFF_UP) -- 2.43.0
