6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Haibo Chen <haibo.chen@xxxxxxx>
commit 190b7e2efb1ed8435fc7431d9c7a2447d05d5066 upstream.
The flexspi on different SoCs may have different number of LUTs.
So involve lut_num in nxp_fspi_devtype_data to make distinguish.
This patch prepare for the adding of imx8ulp.
Fixes: ef89fd56bdfc ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@xxxxxxxxxx
Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
Reviewed-by: Frank Li <Frank.Li@xxxxxxx>
Link: https://patch.msgid.link/20240905094338.1986871-3-haibo.chen@xxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/spi/spi-nxp-fspi.c | 44 +++++++++++++++++++++++++-------------------
1 file changed, 25 insertions(+), 19 deletions(-)
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -57,13 +57,6 @@
#include <linux/spi/spi.h>
#include <linux/spi/spi-mem.h>
-/*
- * The driver only uses one single LUT entry, that is updated on
- * each call of exec_op(). Index 0 is preset at boot with a basic
- * read operation, so let's use the last entry (31).
- */
-#define SEQID_LUT 31
-
/* Registers used by the driver */
#define FSPI_MCR0 0x00
#define FSPI_MCR0_AHB_TIMEOUT(x) ((x) << 24)
@@ -263,9 +256,6 @@
#define FSPI_TFDR 0x180
#define FSPI_LUT_BASE 0x200
-#define FSPI_LUT_OFFSET (SEQID_LUT * 4 * 4)
-#define FSPI_LUT_REG(idx) \
- (FSPI_LUT_BASE + FSPI_LUT_OFFSET + (idx) * 4)
/* register map end */
@@ -341,6 +331,7 @@ struct nxp_fspi_devtype_data {
unsigned int txfifo;
unsigned int ahb_buf_size;
unsigned int quirks;
+ unsigned int lut_num;
bool little_endian;
};
@@ -349,6 +340,7 @@ static struct nxp_fspi_devtype_data lx21
.txfifo = SZ_1K, /* (128 * 64 bits) */
.ahb_buf_size = SZ_2K, /* (256 * 64 bits) */
.quirks = 0,
+ .lut_num = 32,
.little_endian = true, /* little-endian */
};
@@ -357,6 +349,7 @@ static struct nxp_fspi_devtype_data imx8
.txfifo = SZ_1K, /* (128 * 64 bits) */
.ahb_buf_size = SZ_2K, /* (256 * 64 bits) */
.quirks = 0,
+ .lut_num = 32,
.little_endian = true, /* little-endian */
};
@@ -365,6 +358,7 @@ static struct nxp_fspi_devtype_data imx8
.txfifo = SZ_1K, /* (128 * 64 bits) */
.ahb_buf_size = SZ_2K, /* (256 * 64 bits) */
.quirks = 0,
+ .lut_num = 32,
.little_endian = true, /* little-endian */
};
@@ -373,6 +367,7 @@ static struct nxp_fspi_devtype_data imx8
.txfifo = SZ_1K, /* (128 * 64 bits) */
.ahb_buf_size = SZ_2K, /* (256 * 64 bits) */
.quirks = FSPI_QUIRK_USE_IP_ONLY,
+ .lut_num = 32,
.little_endian = true, /* little-endian */
};
@@ -544,6 +539,8 @@ static void nxp_fspi_prepare_lut(struct
void __iomem *base = f->iobase;
u32 lutval[4] = {};
int lutidx = 1, i;
+ u32 lut_offset = (f->devtype_data->lut_num - 1) * 4 * 4;
+ u32 target_lut_reg;
/* cmd */
lutval[0] |= LUT_DEF(0, LUT_CMD, LUT_PAD(op->cmd.buswidth),
@@ -588,8 +585,10 @@ static void nxp_fspi_prepare_lut(struct
fspi_writel(f, FSPI_LCKER_UNLOCK, f->iobase + FSPI_LCKCR);
/* fill LUT */
- for (i = 0; i < ARRAY_SIZE(lutval); i++)
- fspi_writel(f, lutval[i], base + FSPI_LUT_REG(i));
+ for (i = 0; i < ARRAY_SIZE(lutval); i++) {
+ target_lut_reg = FSPI_LUT_BASE + lut_offset + i * 4;
+ fspi_writel(f, lutval[i], base + target_lut_reg);
+ }
dev_dbg(f->dev, "CMD[%x] lutval[0:%x \t 1:%x \t 2:%x \t 3:%x], size: 0x%08x\n",
op->cmd.opcode, lutval[0], lutval[1], lutval[2], lutval[3], op->data.nbytes);
@@ -876,7 +875,7 @@ static int nxp_fspi_do_op(struct nxp_fsp
void __iomem *base = f->iobase;
int seqnum = 0;
int err = 0;
- u32 reg;
+ u32 reg, seqid_lut;
reg = fspi_readl(f, base + FSPI_IPRXFCR);
/* invalid RXFIFO first */
@@ -892,8 +891,9 @@ static int nxp_fspi_do_op(struct nxp_fsp
* the LUT at each exec_op() call. And also specify the DATA
* length, since it's has not been specified in the LUT.
*/
+ seqid_lut = f->devtype_data->lut_num - 1;
fspi_writel(f, op->data.nbytes |
- (SEQID_LUT << FSPI_IPCR1_SEQID_SHIFT) |
+ (seqid_lut << FSPI_IPCR1_SEQID_SHIFT) |
(seqnum << FSPI_IPCR1_SEQNUM_SHIFT),
base + FSPI_IPCR1);
@@ -1017,7 +1017,7 @@ static int nxp_fspi_default_setup(struct
{
void __iomem *base = f->iobase;
int ret, i;
- u32 reg;
+ u32 reg, seqid_lut;
/* disable and unprepare clock to avoid glitch pass to controller */
nxp_fspi_clk_disable_unprep(f);
@@ -1092,11 +1092,17 @@ static int nxp_fspi_default_setup(struct
fspi_writel(f, reg, base + FSPI_FLSHB1CR1);
fspi_writel(f, reg, base + FSPI_FLSHB2CR1);
+ /*
+ * The driver only uses one single LUT entry, that is updated on
+ * each call of exec_op(). Index 0 is preset at boot with a basic
+ * read operation, so let's use the last entry.
+ */
+ seqid_lut = f->devtype_data->lut_num - 1;
/* AHB Read - Set lut sequence ID for all CS. */
- fspi_writel(f, SEQID_LUT, base + FSPI_FLSHA1CR2);
- fspi_writel(f, SEQID_LUT, base + FSPI_FLSHA2CR2);
- fspi_writel(f, SEQID_LUT, base + FSPI_FLSHB1CR2);
- fspi_writel(f, SEQID_LUT, base + FSPI_FLSHB2CR2);
+ fspi_writel(f, seqid_lut, base + FSPI_FLSHA1CR2);
+ fspi_writel(f, seqid_lut, base + FSPI_FLSHA2CR2);
+ fspi_writel(f, seqid_lut, base + FSPI_FLSHB1CR2);
+ fspi_writel(f, seqid_lut, base + FSPI_FLSHB2CR2);
f->selected = -1;
