[PATCH 6.6 329/538] ntb: Force physically contiguous allocation of rx ring buffers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Jiang <dave.jiang@xxxxxxxxx>

[ Upstream commit 061a785a114f159e990ea8ed8d1b7dca4b41120f ]

Physical addresses under IOVA on x86 platform are mapped contiguously
as a side effect before the patch that removed CONFIG_DMA_REMAP. The
NTB rx buffer ring is a single chunk DMA buffer that is allocated
against the NTB PCI device. If the receive side is using a DMA device,
then the buffers are remapped against the DMA device before being
submitted via the dmaengine API. This scheme becomes a problem when
the physical memory is discontiguous. When dma_map_page() is called
on the kernel virtual address from the dma_alloc_coherent() call, the
new IOVA mapping no longer points to all the physical memory allocated
due to being discontiguous. Change dma_alloc_coherent() to dma_alloc_attrs()
in order to force DMA_ATTR_FORCE_CONTIGUOUS attribute. This is the best
fix for the circumstance. A potential future solution may be having the DMA
mapping API providing a way to alias an existing IOVA mapping to a new
device perhaps.

This fix is not to fix the patch pointed to by the fixes tag, but to fix
the issue arised in the ntb_transport driver on x86 platforms after the
said patch is applied.

Reported-by: Jerry Dai <jerry.dai@xxxxxxxxx>
Fixes: f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP")
Tested-by: Jerry Dai <jerry.dai@xxxxxxxxx>
Signed-off-by: Dave Jiang <dave.jiang@xxxxxxxxx>
Signed-off-by: Jon Mason <jdmason@xxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/ntb/ntb_transport.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c
index f9e7847a378e7..c84fadfc63c52 100644
--- a/drivers/ntb/ntb_transport.c
+++ b/drivers/ntb/ntb_transport.c
@@ -807,16 +807,29 @@ static void ntb_free_mw(struct ntb_transport_ctx *nt, int num_mw)
 }
 
 static int ntb_alloc_mw_buffer(struct ntb_transport_mw *mw,
-			       struct device *dma_dev, size_t align)
+			       struct device *ntb_dev, size_t align)
 {
 	dma_addr_t dma_addr;
 	void *alloc_addr, *virt_addr;
 	int rc;
 
-	alloc_addr = dma_alloc_coherent(dma_dev, mw->alloc_size,
-					&dma_addr, GFP_KERNEL);
+	/*
+	 * The buffer here is allocated against the NTB device. The reason to
+	 * use dma_alloc_*() call is to allocate a large IOVA contiguous buffer
+	 * backing the NTB BAR for the remote host to write to. During receive
+	 * processing, the data is being copied out of the receive buffer to
+	 * the kernel skbuff. When a DMA device is being used, dma_map_page()
+	 * is called on the kvaddr of the receive buffer (from dma_alloc_*())
+	 * and remapped against the DMA device. It appears to be a double
+	 * DMA mapping of buffers, but first is mapped to the NTB device and
+	 * second is to the DMA device. DMA_ATTR_FORCE_CONTIGUOUS is necessary
+	 * in order for the later dma_map_page() to not fail.
+	 */
+	alloc_addr = dma_alloc_attrs(ntb_dev, mw->alloc_size,
+				     &dma_addr, GFP_KERNEL,
+				     DMA_ATTR_FORCE_CONTIGUOUS);
 	if (!alloc_addr) {
-		dev_err(dma_dev, "Unable to alloc MW buff of size %zu\n",
+		dev_err(ntb_dev, "Unable to alloc MW buff of size %zu\n",
 			mw->alloc_size);
 		return -ENOMEM;
 	}
@@ -845,7 +858,7 @@ static int ntb_alloc_mw_buffer(struct ntb_transport_mw *mw,
 	return 0;
 
 err:
-	dma_free_coherent(dma_dev, mw->alloc_size, alloc_addr, dma_addr);
+	dma_free_coherent(ntb_dev, mw->alloc_size, alloc_addr, dma_addr);
 
 	return rc;
 }
-- 
2.43.0







[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux