Re: [PATCH 2/4] ACPI: resource: Loosen the Asus E1404GAB DMI match to also cover the E1404GA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Hans,


Thank you for your patch.

Am 27.09.24 um 16:16 schrieb Hans de Goede:
Like other Asus Vivobooks, the Asus Vivobook Go E1404GA has a DSDT
describing IRQ 1 as ActiveLow, while the kernel overrides to Edge_High.

     $ sudo dmesg | grep DMI:.*BIOS
     [    0.000000] DMI: ASUSTeK COMPUTER INC. Vivobook Go E1404GA_E1404GA/E1404GA, BIOS E1404GA.302 08/23/2023
     $ sudo cp /sys/firmware/acpi/tables/DSDT dsdt.dat
     $ iasl -d dsdt.dat
     $ grep -A 30 PS2K dsdt.dsl | grep IRQ -A 1
                 IRQ (Level, ActiveLow, Exclusive, )
                     {1}

There already is an entry in the irq1_level_low_skip_override[] DMI match
table for the "E1404GAB", change this to match on "E1404GA" to cover
the E1404GA model as well (DMI_MATCH() does a substring match).

Ah, good to know. Thank you for fixing it.

Reported-by: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219224
Cc: Tamim Khan <tamim@xxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Note this patch replaces Paul Menzel's patch which added a new entry
for the "E1404GA", instead of loosening the "E1404GAB" match:
https://lore.kernel.org/linux-acpi/20240911081612.3931-1-pmenzel@xxxxxxxxxxxxx/
---
  drivers/acpi/resource.c | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 1ff251fd1901..dfe108e2ccde 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -504,10 +504,10 @@ static const struct dmi_system_id irq1_level_low_skip_override[] = {
  		},
  	},
  	{
-		/* Asus Vivobook Go E1404GAB */
+		/* Asus Vivobook Go E1404GA* */

I guess people are going to grep for the model, if something does not work, so maybe the known ones should listed. I know it’s not optimal, as the comments are very likely be incomplete, but it’s better than than not having it listed, in my opinion.

  		.matches = {
  			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_BOARD_NAME, "E1404GAB"),
+			DMI_MATCH(DMI_BOARD_NAME, "E1404GA"),
  		},
  	},
  	{


Kind regards,

Paul




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux