6.6-stable review patch. If anyone has any objections, please let me know. ------------------ From: Carlos Song <carlos.song@xxxxxxx> [ Upstream commit 783bf5d09f86b9736605f3e01a3472e55ef98ff8 ] Referring to the errata ERR051608 of I.MX93, LPSPI TCR[PRESCALE] can only be configured to be 0 or 1, other values are not valid and will cause LPSPI to not work. Add the prescale limitation for LPSPI in I.MX93. Other platforms are not affected. Signed-off-by: Carlos Song <carlos.song@xxxxxxx> Link: https://patch.msgid.link/20240820070658.672127-1-carlos.song@xxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/spi/spi-fsl-lpspi.c | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c index 3c0f7dc9614d..f02b2f741681 100644 --- a/drivers/spi/spi-fsl-lpspi.c +++ b/drivers/spi/spi-fsl-lpspi.c @@ -82,6 +82,10 @@ #define TCR_RXMSK BIT(19) #define TCR_TXMSK BIT(18) +struct fsl_lpspi_devtype_data { + u8 prescale_max; +}; + struct lpspi_config { u8 bpw; u8 chip_select; @@ -119,10 +123,25 @@ struct fsl_lpspi_data { bool usedma; struct completion dma_rx_completion; struct completion dma_tx_completion; + + const struct fsl_lpspi_devtype_data *devtype_data; +}; + +/* + * ERR051608 fixed or not: + * https://www.nxp.com/docs/en/errata/i.MX93_1P87f.pdf + */ +static struct fsl_lpspi_devtype_data imx93_lpspi_devtype_data = { + .prescale_max = 1, +}; + +static struct fsl_lpspi_devtype_data imx7ulp_lpspi_devtype_data = { + .prescale_max = 8, }; static const struct of_device_id fsl_lpspi_dt_ids[] = { - { .compatible = "fsl,imx7ulp-spi", }, + { .compatible = "fsl,imx7ulp-spi", .data = &imx7ulp_lpspi_devtype_data,}, + { .compatible = "fsl,imx93-spi", .data = &imx93_lpspi_devtype_data,}, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, fsl_lpspi_dt_ids); @@ -297,9 +316,11 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi) { struct lpspi_config config = fsl_lpspi->config; unsigned int perclk_rate, scldiv, div; + u8 prescale_max; u8 prescale; perclk_rate = clk_get_rate(fsl_lpspi->clk_per); + prescale_max = fsl_lpspi->devtype_data->prescale_max; if (!config.speed_hz) { dev_err(fsl_lpspi->dev, @@ -315,7 +336,7 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi) div = DIV_ROUND_UP(perclk_rate, config.speed_hz); - for (prescale = 0; prescale < 8; prescale++) { + for (prescale = 0; prescale < prescale_max; prescale++) { scldiv = div / (1 << prescale) - 2; if (scldiv < 256) { fsl_lpspi->config.prescale = prescale; @@ -822,6 +843,7 @@ static int fsl_lpspi_init_rpm(struct fsl_lpspi_data *fsl_lpspi) static int fsl_lpspi_probe(struct platform_device *pdev) { + const struct fsl_lpspi_devtype_data *devtype_data; struct fsl_lpspi_data *fsl_lpspi; struct spi_controller *controller; struct resource *res; @@ -830,6 +852,10 @@ static int fsl_lpspi_probe(struct platform_device *pdev) u32 temp; bool is_target; + devtype_data = of_device_get_match_data(&pdev->dev); + if (!devtype_data) + return -ENODEV; + is_target = of_property_read_bool((&pdev->dev)->of_node, "spi-slave"); if (is_target) controller = devm_spi_alloc_target(&pdev->dev, @@ -848,6 +874,7 @@ static int fsl_lpspi_probe(struct platform_device *pdev) fsl_lpspi->is_target = is_target; fsl_lpspi->is_only_cs1 = of_property_read_bool((&pdev->dev)->of_node, "fsl,spi-only-use-cs1-sel"); + fsl_lpspi->devtype_data = devtype_data; init_completion(&fsl_lpspi->xfer_done); -- 2.43.0
