[PATCH 6.1 061/192] media: vivid: dont set HDMI TX controls if there are no HDMI outputs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>

[ Upstream commit 17763960b1784578e8fe915304b330922f646209 ]

When setting the EDID it would attempt to update two controls
that are only present if there is an HDMI output configured.

If there isn't any (e.g. when the vivid module is loaded with
node_types=1), then calling VIDIOC_S_EDID would crash.

Fix this by first checking if outputs are present.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/media/test-drivers/vivid/vivid-vid-cap.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/media/test-drivers/vivid/vivid-vid-cap.c b/drivers/media/test-drivers/vivid/vivid-vid-cap.c
index bff95cb57718..3864df45077d 100644
--- a/drivers/media/test-drivers/vivid/vivid-vid-cap.c
+++ b/drivers/media/test-drivers/vivid/vivid-vid-cap.c
@@ -1810,8 +1810,10 @@ int vidioc_s_edid(struct file *file, void *_fh,
 		return -EINVAL;
 	if (edid->blocks == 0) {
 		dev->edid_blocks = 0;
-		v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present, 0);
-		v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug, 0);
+		if (dev->num_outputs) {
+			v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present, 0);
+			v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug, 0);
+		}
 		phys_addr = CEC_PHYS_ADDR_INVALID;
 		goto set_phys_addr;
 	}
@@ -1835,8 +1837,10 @@ int vidioc_s_edid(struct file *file, void *_fh,
 			display_present |=
 				dev->display_present[i] << j++;
 
-	v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present, display_present);
-	v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug, display_present);
+	if (dev->num_outputs) {
+		v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present, display_present);
+		v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug, display_present);
+	}
 
 set_phys_addr:
 	/* TODO: a proper hotplug detect cycle should be emulated here */
-- 
2.43.0







[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux