From: Steven Rostedt <rostedt@xxxxxxxxxxx> The start_kthread() and stop_thread() code was not always called with the interface_lock held. This means that the kthread variable could be unexpectedly changed causing the kthread_stop() to be called on it when it should not have been, leading to: while true; do rtla timerlat top -u -q & PID=$!; sleep 5; kill -INT $PID; sleep 0.001; kill -TERM $PID; wait $PID; done Causing the following OOPS: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 5 UID: 0 PID: 885 Comm: timerlatu/5 Not tainted 6.11.0-rc4-test-00002-gbc754cc76d1b-dirty #125 a533010b71dab205ad2f507188ce8c82203b0254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:hrtimer_active+0x58/0x300 Code: 48 c1 ee 03 41 54 48 01 d1 48 01 d6 55 53 48 83 ec 20 80 39 00 0f 85 30 02 00 00 49 8b 6f 30 4c 8d 75 10 4c 89 f0 48 c1 e8 03 <0f> b6 3c 10 4c 89 f0 83 e0 07 83 c0 03 40 38 f8 7c 09 40 84 ff 0f RSP: 0018:ffff88811d97f940 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff88823c6b5b28 RCX: ffffed10478d6b6b RDX: dffffc0000000000 RSI: ffffed10478d6b6c RDI: ffff88823c6b5b28 RBP: 0000000000000000 R08: ffff88823c6b5b58 R09: ffff88823c6b5b60 R10: ffff88811d97f957 R11: 0000000000000010 R12: 00000000000a801d R13: ffff88810d8b35d8 R14: 0000000000000010 R15: ffff88823c6b5b28 FS: 0000000000000000(0000) GS:ffff88823c680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000561858ad7258 CR3: 000000007729e001 CR4: 0000000000170ef0 Call Trace: <TASK> ? die_addr+0x40/0xa0 ? exc_general_protection+0x154/0x230 ? asm_exc_general_protection+0x26/0x30 ? hrtimer_active+0x58/0x300 ? __pfx_mutex_lock+0x10/0x10 ? __pfx_locks_remove_file+0x10/0x10 hrtimer_cancel+0x15/0x40 timerlat_fd_release+0x8e/0x1f0 ? security_file_release+0x43/0x80 __fput+0x372/0xb10 task_work_run+0x11e/0x1f0 ? _raw_spin_lock+0x85/0xe0 ? __pfx_task_work_run+0x10/0x10 ? poison_slab_object+0x109/0x170 ? do_exit+0x7a0/0x24b0 do_exit+0x7bd/0x24b0 ? __pfx_migrate_enable+0x10/0x10 ? __pfx_do_exit+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x64/0x140 ? _raw_spin_lock_irq+0x86/0xe0 do_group_exit+0xb0/0x220 get_signal+0x17ba/0x1b50 ? vfs_read+0x179/0xa40 ? timerlat_fd_read+0x30b/0x9d0 ? __pfx_get_signal+0x10/0x10 ? __pfx_timerlat_fd_read+0x10/0x10 arch_do_signal_or_restart+0x8c/0x570 ? __pfx_arch_do_signal_or_restart+0x10/0x10 ? vfs_read+0x179/0xa40 ? ksys_read+0xfe/0x1d0 ? __pfx_ksys_read+0x10/0x10 syscall_exit_to_user_mode+0xbc/0x130 do_syscall_64+0x74/0x110 ? __pfx___rseq_handle_notify_resume+0x10/0x10 ? __pfx_ksys_read+0x10/0x10 ? fpregs_restore_userregs+0xdb/0x1e0 ? fpregs_restore_userregs+0xdb/0x1e0 ? syscall_exit_to_user_mode+0x116/0x130 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7ff0070eca9c Code: Unable to access opcode bytes at 0x7ff0070eca72. RSP: 002b:00007ff006dff8c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: 0000000000000000 RBX: 0000000000000005 RCX: 00007ff0070eca9c RDX: 0000000000000400 RSI: 00007ff006dff9a0 RDI: 0000000000000003 RBP: 00007ff006dffde0 R08: 0000000000000000 R09: 00007ff000000ba0 R10: 00007ff007004b08 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ff006dff9a0 R14: 0000000000000007 R15: 0000000000000008 </TASK> Modules linked in: snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hwdep snd_hda_core ---[ end trace 0000000000000000 ]--- This is because it would mistakenly call kthread_stop() on a user space thread making it "exit" before it actually exits. Since kthreads are created based on global behavior, use a cpumask to know when kthreads are running and that they need to be shutdown before proceeding to do new work. Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@xxxxxxxxxx/ This was debugged by using the persistent ring buffer: Link: https://lore.kernel.org/all/20240823013902.135036960@xxxxxxxxxxx/ Note, locking was originally used to fix this, but that proved to cause too many deadlocks to work around: https://lore.kernel.org/linux-trace-kernel/20240823102816.5e55753b@xxxxxxxxxxxxxxxxxx/ Cc: stable@xxxxxxxxxxxxxxx Cc: Masami Hiramatsu <mhiramat@xxxxxxxxxx> Cc: Mathieu Desnoyers <mathieu.desnoyers@xxxxxxxxxxxx> Cc: "Luis Claudio R. Goncalves" <lgoncalv@xxxxxxxxxx> Link: https://lore.kernel.org/20240904103428.08efdf4c@xxxxxxxxxxxxxxxxxx Fixes: e88ed227f639e ("tracing/timerlat: Add user-space interface") Reported-by: Tomas Glozar <tglozar@xxxxxxxxxx> Signed-off-by: Steven Rostedt (Google) <rostedt@xxxxxxxxxxx> --- kernel/trace/trace_osnoise.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/kernel/trace/trace_osnoise.c b/kernel/trace/trace_osnoise.c index 400a72cd6ab5..8543d941b870 100644 --- a/kernel/trace/trace_osnoise.c +++ b/kernel/trace/trace_osnoise.c @@ -1614,6 +1614,7 @@ static int run_osnoise(void) static struct cpumask osnoise_cpumask; static struct cpumask save_cpumask; +static struct cpumask kthread_cpumask; /* * osnoise_sleep - sleep until the next period @@ -1677,6 +1678,7 @@ static inline int osnoise_migration_pending(void) */ mutex_lock(&interface_lock); this_cpu_osn_var()->kthread = NULL; + cpumask_clear_cpu(smp_processor_id(), &kthread_cpumask); mutex_unlock(&interface_lock); return 1; @@ -1949,9 +1951,10 @@ static void stop_kthread(unsigned int cpu) kthread = per_cpu(per_cpu_osnoise_var, cpu).kthread; if (kthread) { - if (test_bit(OSN_WORKLOAD, &osnoise_options)) { + if (cpumask_test_and_clear_cpu(cpu, &kthread_cpumask) && + !WARN_ON(!test_bit(OSN_WORKLOAD, &osnoise_options))) { kthread_stop(kthread); - } else { + } else if (!WARN_ON(test_bit(OSN_WORKLOAD, &osnoise_options))) { /* * This is a user thread waiting on the timerlat_fd. We need * to close all users, and the best way to guarantee this is @@ -2023,6 +2026,7 @@ static int start_kthread(unsigned int cpu) } per_cpu(per_cpu_osnoise_var, cpu).kthread = kthread; + cpumask_set_cpu(cpu, &kthread_cpumask); return 0; } @@ -2050,8 +2054,16 @@ static int start_per_cpu_kthreads(void) */ cpumask_and(current_mask, cpu_online_mask, &osnoise_cpumask); - for_each_possible_cpu(cpu) + for_each_possible_cpu(cpu) { + if (cpumask_test_and_clear_cpu(cpu, &kthread_cpumask)) { + struct task_struct *kthread; + + kthread = per_cpu(per_cpu_osnoise_var, cpu).kthread; + if (!WARN_ON(!kthread)) + kthread_stop(kthread); + } per_cpu(per_cpu_osnoise_var, cpu).kthread = NULL; + } for_each_cpu(cpu, current_mask) { retval = start_kthread(cpu); -- 2.43.0
