5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Selvarasu Ganesan <selvarasu.g@xxxxxxxxxxx>
commit 14e497183df28c006603cc67fd3797a537eef7b9 upstream.
This commit addresses an issue where the USB core could access an
invalid event buffer address during runtime suspend, potentially causing
SMMU faults and other memory issues in Exynos platforms. The problem
arises from the following sequence.
1. In dwc3_gadget_suspend, there is a chance of a timeout when
moving the USB core to the halt state after clearing the
run/stop bit by software.
2. In dwc3_core_exit, the event buffer is cleared regardless of
the USB core's status, which may lead to an SMMU faults and
other memory issues. if the USB core tries to access the event
buffer address.
To prevent this hardware quirk on Exynos platforms, this commit ensures
that the event buffer address is not cleared by software when the USB
core is active during runtime suspend by checking its status before
clearing the buffer address.
Cc: stable <stable@xxxxxxxxxx>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@xxxxxxxxxxx>
Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20240815064836.1491-1-selvarasu.g@xxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/dwc3/core.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -477,9 +477,17 @@ int dwc3_event_buffers_setup(struct dwc3
void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
+ u32 reg;
if (!dwc->ev_buf)
return;
+ /*
+ * Exynos platforms may not be able to access event buffer if the
+ * controller failed to halt on dwc3_core_exit().
+ */
+ reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+ if (!(reg & DWC3_DSTS_DEVCTRLHLT))
+ return;
evt = dwc->ev_buf;
