From: Peter Wang <peter.wang@xxxxxxxxxxxx> When setting the ICU bit without using read-modify-write, SQRTCy will restart SQ again and receive an RTC return error code 2 (Failure - SQ not stopped). Additionally, the error log has been modified so that this type of error can be observed. Fixes: ab248643d3d6 ("scsi: ufs: core: Add error handling for MCQ mode") Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Peter Wang <peter.wang@xxxxxxxxxxxx> --- drivers/ufs/core/ufs-mcq.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c index 5891cdacd0b3..afd9541f4bd8 100644 --- a/drivers/ufs/core/ufs-mcq.c +++ b/drivers/ufs/core/ufs-mcq.c @@ -570,15 +570,16 @@ int ufshcd_mcq_sq_cleanup(struct ufs_hba *hba, int task_tag) writel(nexus, opr_sqd_base + REG_SQCTI); /* SQRTCy.ICU = 1 */ - writel(SQ_ICU, opr_sqd_base + REG_SQRTC); + writel(readl(opr_sqd_base + REG_SQRTC) | SQ_ICU, + opr_sqd_base + REG_SQRTC); /* Poll SQRTSy.CUS = 1. Return result from SQRTSy.RTC */ reg = opr_sqd_base + REG_SQRTS; err = read_poll_timeout(readl, val, val & SQ_CUS, 20, MCQ_POLL_US, false, reg); - if (err) - dev_err(hba->dev, "%s: failed. hwq=%d, tag=%d err=%ld\n", - __func__, id, task_tag, + if (err || FIELD_GET(SQ_ICU_ERR_CODE_MASK, readl(reg))) + dev_err(hba->dev, "%s: failed. hwq=%d, tag=%d err=%d RTC=%ld\n", + __func__, id, task_tag, err, FIELD_GET(SQ_ICU_ERR_CODE_MASK, readl(reg))); if (ufshcd_mcq_sq_start(hba, hwq)) -- 2.45.2