6.1-stable review patch. If anyone has any objections, please let me know. ------------------ From: Eli Billauer <eli.billauer@xxxxxxxxx> commit 2374bf7558de915edc6ec8cb10ec3291dfab9594 upstream. Ensure, as the driver probes the device, that all endpoints that the driver may attempt to access exist and are of the correct type. All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at address 1. This is verified in xillyusb_setup_base_eps(). On top of that, a XillyUSB device may have additional Bulk OUT endpoints. The information about these endpoints' addresses is deduced from a data structure (the IDT) that the driver fetches from the device while probing it. These endpoints are checked in setup_channels(). A XillyUSB device never has more than one IN endpoint, as all data towards the host is multiplexed in this single Bulk IN endpoint. This is why setup_channels() only checks OUT endpoints. Reported-by: syzbot+eac39cba052f2e750dbe@xxxxxxxxxxxxxxxxxxxxxxxxx Cc: stable <stable@xxxxxxxxxx> Closes: https://lore.kernel.org/all/0000000000001d44a6061f7a54ee@xxxxxxxxxx/T/ Fixes: a53d1202aef1 ("char: xillybus: Add driver for XillyUSB (Xillybus variant for USB)"). Signed-off-by: Eli Billauer <eli.billauer@xxxxxxxxx> Link: https://lore.kernel.org/r/20240816070200.50695-2-eli.billauer@xxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/char/xillybus/xillyusb.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) --- a/drivers/char/xillybus/xillyusb.c +++ b/drivers/char/xillybus/xillyusb.c @@ -1889,6 +1889,13 @@ static const struct file_operations xill static int xillyusb_setup_base_eps(struct xillyusb_dev *xdev) { + struct usb_device *udev = xdev->udev; + + /* Verify that device has the two fundamental bulk in/out endpoints */ + if (usb_pipe_type_check(udev, usb_sndbulkpipe(udev, MSG_EP_NUM)) || + usb_pipe_type_check(udev, usb_rcvbulkpipe(udev, IN_EP_NUM))) + return -ENODEV; + xdev->msg_ep = endpoint_alloc(xdev, MSG_EP_NUM | USB_DIR_OUT, bulk_out_work, 1, 2); if (!xdev->msg_ep) @@ -1918,14 +1925,15 @@ static int setup_channels(struct xillyus __le16 *chandesc, int num_channels) { - struct xillyusb_channel *chan; + struct usb_device *udev = xdev->udev; + struct xillyusb_channel *chan, *new_channels; int i; chan = kcalloc(num_channels, sizeof(*chan), GFP_KERNEL); if (!chan) return -ENOMEM; - xdev->channels = chan; + new_channels = chan; for (i = 0; i < num_channels; i++, chan++) { unsigned int in_desc = le16_to_cpu(*chandesc++); @@ -1954,6 +1962,15 @@ static int setup_channels(struct xillyus */ if ((out_desc & 0x80) && i < 14) { /* Entry is valid */ + if (usb_pipe_type_check(udev, + usb_sndbulkpipe(udev, i + 2))) { + dev_err(xdev->dev, + "Missing BULK OUT endpoint %d\n", + i + 2); + kfree(new_channels); + return -ENODEV; + } + chan->writable = 1; chan->out_synchronous = !!(out_desc & 0x40); chan->out_seekable = !!(out_desc & 0x20); @@ -1963,6 +1980,7 @@ static int setup_channels(struct xillyus } } + xdev->channels = new_channels; return 0; }
