6.6-stable review patch. If anyone has any objections, please let me know. ------------------ From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> [ Upstream commit d72a3d35b7ef5a3c0260462f130fa3dd7576aa2f ] Stop multiplexing several events via the dpu_encoder_wait_for_event() function. Split it into two distinct functions two allow separate handling of those events. Reviewed-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Patchwork: https://patchwork.freedesktop.org/patch/579848/ Link: https://lore.kernel.org/r/20240226-fd-dpu-debug-timeout-v4-2-51eec83dde23@xxxxxxxxxx Stable-dep-of: aedf02e46eb5 ("drm/msm/dpu: move dpu_encoder's connector assignment to atomic_enable()") Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 70 +++++++++++++++------ drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 22 +------ drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 +- drivers/gpu/drm/msm/msm_drv.h | 10 --- 4 files changed, 55 insertions(+), 49 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index 57001543dc220..ba60997350890 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -1265,7 +1265,7 @@ static void dpu_encoder_virt_atomic_disable(struct drm_encoder *drm_enc, trace_dpu_enc_disable(DRMID(drm_enc)); /* wait for idle */ - dpu_encoder_wait_for_event(drm_enc, MSM_ENC_TX_COMPLETE); + dpu_encoder_wait_for_tx_complete(drm_enc); dpu_encoder_resource_control(drm_enc, DPU_ENC_RC_EVENT_PRE_STOP); @@ -2417,10 +2417,18 @@ struct drm_encoder *dpu_encoder_init(struct drm_device *dev, return ERR_PTR(ret); } -int dpu_encoder_wait_for_event(struct drm_encoder *drm_enc, - enum msm_event_wait event) +/** + * dpu_encoder_wait_for_commit_done() - Wait for encoder to flush pending state + * @drm_enc: encoder pointer + * + * Wait for hardware to have flushed the current pending changes to hardware at + * a vblank or CTL_START. Physical encoders will map this differently depending + * on the type: vid mode -> vsync_irq, cmd mode -> CTL_START. + * + * Return: 0 on success, -EWOULDBLOCK if already signaled, error otherwise + */ +int dpu_encoder_wait_for_commit_done(struct drm_encoder *drm_enc) { - int (*fn_wait)(struct dpu_encoder_phys *phys_enc) = NULL; struct dpu_encoder_virt *dpu_enc = NULL; int i, ret = 0; @@ -2434,23 +2442,47 @@ int dpu_encoder_wait_for_event(struct drm_encoder *drm_enc, for (i = 0; i < dpu_enc->num_phys_encs; i++) { struct dpu_encoder_phys *phys = dpu_enc->phys_encs[i]; - switch (event) { - case MSM_ENC_COMMIT_DONE: - fn_wait = phys->ops.wait_for_commit_done; - break; - case MSM_ENC_TX_COMPLETE: - fn_wait = phys->ops.wait_for_tx_complete; - break; - default: - DPU_ERROR_ENC(dpu_enc, "unknown wait event %d\n", - event); - return -EINVAL; + if (phys->ops.wait_for_commit_done) { + DPU_ATRACE_BEGIN("wait_for_commit_done"); + ret = phys->ops.wait_for_commit_done(phys); + DPU_ATRACE_END("wait_for_commit_done"); + if (ret) + return ret; } + } + + return ret; +} + +/** + * dpu_encoder_wait_for_tx_complete() - Wait for encoder to transfer pixels to panel + * @drm_enc: encoder pointer + * + * Wait for the hardware to transfer all the pixels to the panel. Physical + * encoders will map this differently depending on the type: vid mode -> vsync_irq, + * cmd mode -> pp_done. + * + * Return: 0 on success, -EWOULDBLOCK if already signaled, error otherwise + */ +int dpu_encoder_wait_for_tx_complete(struct drm_encoder *drm_enc) +{ + struct dpu_encoder_virt *dpu_enc = NULL; + int i, ret = 0; + + if (!drm_enc) { + DPU_ERROR("invalid encoder\n"); + return -EINVAL; + } + dpu_enc = to_dpu_encoder_virt(drm_enc); + DPU_DEBUG_ENC(dpu_enc, "\n"); + + for (i = 0; i < dpu_enc->num_phys_encs; i++) { + struct dpu_encoder_phys *phys = dpu_enc->phys_encs[i]; - if (fn_wait) { - DPU_ATRACE_BEGIN("wait_for_completion_event"); - ret = fn_wait(phys); - DPU_ATRACE_END("wait_for_completion_event"); + if (phys->ops.wait_for_tx_complete) { + DPU_ATRACE_BEGIN("wait_for_tx_complete"); + ret = phys->ops.wait_for_tx_complete(phys); + DPU_ATRACE_END("wait_for_tx_complete"); if (ret) return ret; } diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h index fe6b1d312a742..0c928d1876e4a 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h @@ -93,25 +93,9 @@ void dpu_encoder_kickoff(struct drm_encoder *encoder); */ int dpu_encoder_vsync_time(struct drm_encoder *drm_enc, ktime_t *wakeup_time); -/** - * dpu_encoder_wait_for_event - Waits for encoder events - * @encoder: encoder pointer - * @event: event to wait for - * MSM_ENC_COMMIT_DONE - Wait for hardware to have flushed the current pending - * frames to hardware at a vblank or ctl_start - * Encoders will map this differently depending on the - * panel type. - * vid mode -> vsync_irq - * cmd mode -> ctl_start - * MSM_ENC_TX_COMPLETE - Wait for the hardware to transfer all the pixels to - * the panel. Encoders will map this differently - * depending on the panel type. - * vid mode -> vsync_irq - * cmd mode -> pp_done - * Returns: 0 on success, -EWOULDBLOCK if already signaled, error otherwise - */ -int dpu_encoder_wait_for_event(struct drm_encoder *drm_encoder, - enum msm_event_wait event); +int dpu_encoder_wait_for_commit_done(struct drm_encoder *drm_encoder); + +int dpu_encoder_wait_for_tx_complete(struct drm_encoder *drm_encoder); /* * dpu_encoder_get_intf_mode - get interface mode of the given encoder diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index aa6ba2cf4b840..6ba289e04b3b2 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -490,7 +490,7 @@ static void dpu_kms_wait_for_commit_done(struct msm_kms *kms, * mode panels. This may be a no-op for command mode panels. */ trace_dpu_kms_wait_for_commit_done(DRMID(crtc)); - ret = dpu_encoder_wait_for_event(encoder, MSM_ENC_COMMIT_DONE); + ret = dpu_encoder_wait_for_commit_done(encoder); if (ret && ret != -EWOULDBLOCK) { DPU_ERROR("wait for commit done returned %d\n", ret); break; diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h index 182543c92770c..48e1a8c6942c9 100644 --- a/drivers/gpu/drm/msm/msm_drv.h +++ b/drivers/gpu/drm/msm/msm_drv.h @@ -74,16 +74,6 @@ enum msm_dsi_controller { #define MSM_GPU_MAX_RINGS 4 #define MAX_H_TILES_PER_DISPLAY 2 -/** - * enum msm_event_wait - type of HW events to wait for - * @MSM_ENC_COMMIT_DONE - wait for the driver to flush the registers to HW - * @MSM_ENC_TX_COMPLETE - wait for the HW to transfer the frame to panel - */ -enum msm_event_wait { - MSM_ENC_COMMIT_DONE = 0, - MSM_ENC_TX_COMPLETE, -}; - /** * struct msm_display_topology - defines a display topology pipeline * @num_lm: number of layer mixers used -- 2.43.0
