This reverts commit bc792884b76f ("s390/dasd: Establish DMA alignment").
Quoting the original commit:
linux-next commit bf8d08532bc1 ("iomap: add support for dma aligned
direct-io") changes the alignment requirement to come from the block
device rather than the block size, and the default alignment
requirement is 512-byte boundaries. Since DASD I/O has page
alignments for IDAW/TIDAW requests, let's override this value to
restore the expected behavior.
I mentioned TIDAW, but that was wrong. TIDAWs have no distinct alignment
requirement (per p. 15-70 of POPS SA22-7832-13):
Unless otherwise specified, TIDAWs may designate
a block of main storage on any boundary and length
up to 4K bytes, provided the specified block does not
cross a 4 K-byte boundary.
IDAWs do, but the original commit neglected that while ECKD DASD are
typically formatted in 4096-byte blocks, they don't HAVE to be. Formatting
an ECKD volume with smaller blocks is permitted (dasdfmt -b xxx), and the
problematic commit enforces alignment properties to such a device that
will result in errors, such as:
[test@host ~]# lsdasd -l a367 | grep blksz
blksz: 512
[test@host ~]# mkfs.xfs -f /dev/disk/by-path/ccw-0.0.a367-part1
meta-data=/dev/dasdc1 isize=512 agcount=4, agsize=230075 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=1
= reflink=1 bigtime=1 inobtcount=1 nrext64=1
data = bsize=4096 blocks=920299, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=16384, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
error reading existing superblock: Invalid argument
mkfs.xfs: pwrite failed: Invalid argument
libxfs_bwrite: write failed on (unknown) bno 0x70565c/0x100, err=22
mkfs.xfs: Releasing dirty buffer to free list!
found dirty buffer (bulk) on free list!
mkfs.xfs: pwrite failed: Invalid argument
...snipped...
The original commit omitted the FBA discipline for just this reason,
but the formatted block size of the other disciplines was overlooked.
The solution to all of this is to revert to the original behavior,
such that the block size can be respected.
But what of the original problem? That was manifested with a direct-io
QEMU guest, where QEMU itself was changed a month or two later with
commit 25474d90aa ("block: use the request length for iov alignment")
such that the blamed kernel commit is unnecessary.
Note: This is an adapted version of the original upstream commit
2a07bb64d801 ("s390/dasd: Remove DMA alignment").
Cc: stable@xxxxxxxxxxxxxxx # 6.0+
Signed-off-by: Jan Höppner <hoeppner@xxxxxxxxxxxxx>
---
drivers/s390/block/dasd_diag.c | 1 -
drivers/s390/block/dasd_eckd.c | 1 -
2 files changed, 2 deletions(-)
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index 2e4e555b37c3..12db1046aad0 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -639,7 +639,6 @@ static void dasd_diag_setup_blk_queue(struct dasd_block *block)
/* With page sized segments each segment can be translated into one idaw/tidaw */
blk_queue_max_segment_size(q, PAGE_SIZE);
blk_queue_segment_boundary(q, PAGE_SIZE - 1);
- blk_queue_dma_alignment(q, PAGE_SIZE - 1);
}
static int dasd_diag_pe_handler(struct dasd_device *device,
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index bd89b032968a..18b63210ac5d 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -6895,7 +6895,6 @@ static void dasd_eckd_setup_blk_queue(struct dasd_block *block)
/* With page sized segments each segment can be translated into one idaw/tidaw */
blk_queue_max_segment_size(q, PAGE_SIZE);
blk_queue_segment_boundary(q, PAGE_SIZE - 1);
- blk_queue_dma_alignment(q, PAGE_SIZE - 1);
}
static struct ccw_driver dasd_eckd_driver = {
--
2.43.0
