Add a mhi_pci_dev_info struct specific for the Telit FE990A modem in
order to use the correct product name.
Cc: stable@xxxxxxxxxxxxxxx # 6.1+
Fixes: 0724869ede9c ("bus: mhi: host: pci_generic: add support for Telit FE990 modem")
Signed-off-by: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
---
drivers/bus/mhi/host/pci_generic.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index 14a11880bcea..fb701c67f763 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -680,6 +680,15 @@ static const struct mhi_pci_dev_info mhi_telit_fn990_info = {
.mru_default = 32768,
};
+static const struct mhi_pci_dev_info mhi_telit_fe990a_info = {
+ .name = "telit-fe990a",
+ .config = &modem_telit_fn990_config,
+ .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+ .dma_data_width = 32,
+ .sideband_wake = false,
+ .mru_default = 32768,
+};
+
/* Keep the list sorted based on the PID. New VID should be added as the last entry */
static const struct pci_device_id mhi_pci_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
@@ -697,9 +706,9 @@ static const struct pci_device_id mhi_pci_id_table[] = {
/* Telit FN990 */
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2010),
.driver_data = (kernel_ulong_t) &mhi_telit_fn990_info },
- /* Telit FE990 */
+ /* Telit FE990A */
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2015),
- .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info },
+ .driver_data = (kernel_ulong_t) &mhi_telit_fe990a_info },
{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308),
.driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info },
{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0309),
--
2.46.0
