On Sun, Aug 18, 2024 at 04:17:38PM -0700, Bjorn Andersson wrote:
> Commit 'caa855189104 ("soc: qcom: pmic_glink: Fix race during
> initialization")'
This commit does not exist, but I think you really meant to refer to
9329933699b3 ("soc: qcom: pmic_glink: Make client-lock non-sleeping")
and possibly also
635ce0db8956 ("soc: qcom: pmic_glink: don't traverse clients list without a lock")
here.
> moved the pmic_glink client list under a spinlock, as
> it is accessed by the rpmsg/glink callback, which in turn is invoked
> from IRQ context.
>
> This means that ucsi_unregister() is now called from IRQ context, which
> isn't feasible as it's expecting a sleepable context.
But this is not correct as you say above that the callback has always
been made in IRQ context. Then this bug has been there since the
introduction of the UCSI driver by commit
62b5412b1f4a ("usb: typec: ucsi: add PMIC Glink UCSI driver")
> An effort is under
> way to get GLINK to invoke its callbacks in a sleepable context, but
> until then lets schedule the unregistration.
>
> A side effect of this is that ucsi_unregister() can now happen
> after the remote processor, and thereby the communication link with it, is
> gone. pmic_glink_send() is amended with a check to avoid the resulting
> NULL pointer dereference, but it becomes expecting to see a failing send
Perhaps you can rephrase this bit ("becomes expecting to see").
> upon shutting down the remote processor (e.g. during a restart following
> a firmware crash):
>
> ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: failed to send UCSI write request: -5
>
> Fixes: caa855189104 ("soc: qcom: pmic_glink: Fix race during initialization")
So this should be
Fixes: 62b5412b1f4a ("usb: typec: ucsi: add PMIC Glink UCSI driver")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c
> index ac53a81c2a81..a33056eec83d 100644
> --- a/drivers/usb/typec/ucsi/ucsi_glink.c
> +++ b/drivers/usb/typec/ucsi/ucsi_glink.c
> @@ -68,6 +68,9 @@ struct pmic_glink_ucsi {
>
> struct work_struct notify_work;
> struct work_struct register_work;
> + spinlock_t state_lock;
> + unsigned int pdr_state;
> + unsigned int new_pdr_state;
Should these be int to match the notify callback (and enum
servreg_service_state)?
> u8 read_buf[UCSI_BUF_SIZE];
> };
> @@ -244,8 +247,22 @@ static void pmic_glink_ucsi_notify(struct work_struct *work)
> static void pmic_glink_ucsi_register(struct work_struct *work)
> {
> struct pmic_glink_ucsi *ucsi = container_of(work, struct pmic_glink_ucsi, register_work);
> + unsigned long flags;
> + unsigned int new_state;
Then int here too.
> +
> + spin_lock_irqsave(&ucsi->state_lock, flags);
> + new_state = ucsi->new_pdr_state;
> + spin_unlock_irqrestore(&ucsi->state_lock, flags);
> +
> + if (ucsi->pdr_state != SERVREG_SERVICE_STATE_UP) {
> + if (new_state == SERVREG_SERVICE_STATE_UP)
> + ucsi_register(ucsi->ucsi);
> + } else {
> + if (new_state == SERVREG_SERVICE_STATE_DOWN)
> + ucsi_unregister(ucsi->ucsi);
Do you risk a double deregistration (and UAF/double free) here?
> + }
>
> - ucsi_register(ucsi->ucsi);
> + ucsi->pdr_state = new_state;
> }
Johan
