Re: [PATCH 6.10] drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 17.08.24 10:42, Greg KH wrote:
On Tue, Jul 30, 2024 at 08:53:39PM +0200, Kevin Holm wrote:
From: Wayne Lin <wayne.lin@xxxxxxx>

[ Upstream commit fa57924c76d995e87ca3533ec60d1d5e55769a27 ]

[Why]
dm_dp_mst_is_port_support_mode() is a bit not following the original design rule and cause
light up issue with multiple 4k monitors after mst dsc hub.

[How]
Refactor function dm_dp_mst_is_port_support_mode() a bit to solve the light up issue.

Reviewed-by: Jerry Zuo <jerry.zuo@xxxxxxx>
Acked-by: Zaeem Mohamed <zaeem.mohamed@xxxxxxx>
Signed-off-by: Wayne Lin <wayne.lin@xxxxxxx>
Tested-by: Daniel Wheeler <daniel.wheeler@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
[kevin@xxxxxxxx: Resolved merge conflict in .../amdgpu_dm_mst_types.c]
Fixes: 4df96ba6676034 ("drm/amd/display: Add timing pixel encoding for mst mode validation")
Link: https://lore.kernel.org/stable/d74a7768e957e6ce88c27a5bece0c64dff132e24@xxxxxxxx/T/#u
Signed-off-by: Kevin Holm <kevin@xxxxxxxx>
---
I resolved the merge conflict so that, after this patch is applied to the
linux-6.10.y branch of the stable git repository, the resulting function
dm_dp_mst_is_port_support_mode (and also the new function
dp_get_link_current_set_bw) is identical to the original commit.

I've confirmed that it fixes the regression I reported for my use case.

And it turns out this change breaks the arm and arm64 builds.  I tried
to fix it up by applying the fixup afterward for this file, but it's
just too much of a mess to unwind this, so I'm going to have to revert
this now, sorry.
That sucks, sorry for the problems my patch caused. :(

See:
	https://lore.kernel.org/r/b27c5434-f1b1-4697-985b-91bb3e9a22df@xxxxxxxxxxxx
for details.
I unfortunately don't know the amdgpu driver and kernel code in general enough to help fix
that. The back-ported patch I send was my first patch to the kernel.

In the email thread where I reported the problem I send a patch that reverts
4df96ba6676034 ("drm/amd/display: Add timing pixel encoding for mst mode validation") to
fix the problem that way [1]. I've included a copy of that below.
I've tested that it still applies to 6.10.6-rc3 without conflicts and compiles for me. I
could not test if the 6.10.6-rc3 with the revert applied fixes the problem as I'm
traveling and don't have access to my normal setup. I can only say that reverting it on
v6.10.2 fixed the problem for me.

I don't know how to compile for other architectures so I did not test that.

Not sure what would be best, reverting the problem commit so the regression is fixed in
the 6.10 stable kernel (and maybe breaking something else?) or waiting for someone at AMD
with better knowledge of the amdgpu driver to back-port the fixing commit in a non-broken
way.

~kevin

[1] https://lore.kernel.org/regressions/7bf26283474fbb6ea915f93f4db0bc614a627617@xxxxxxxx/

greg k-h
---
 .../display/amdgpu_dm/amdgpu_dm_mst_types.c   | 33 +++----------------
 1 file changed, 5 insertions(+), 28 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index a5e1a93ddaea..5c555a37e367 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -1599,7 +1599,7 @@ enum dc_status dm_dp_mst_is_port_support_mode(
        struct amdgpu_dm_connector *aconnector,
        struct dc_stream_state *stream)
 {
-       int pbn, branch_max_throughput_mps = 0;
+       int bpp, pbn, branch_max_throughput_mps = 0;
        struct dc_link_settings cur_link_settings;
        unsigned int end_to_end_bw_in_kbps = 0;
        unsigned int upper_link_bw_in_kbps = 0, down_link_bw_in_kbps = 0;
@@ -1649,34 +1649,11 @@ enum dc_status dm_dp_mst_is_port_support_mode(
                        }
                }
        } else {
-               /* Check if mode could be supported within max slot
-                * number of current mst link and full_pbn of mst links.
-                */
-               int pbn_div, slot_num, max_slot_num;
-               enum dc_link_encoding_format link_encoding;
-               uint32_t stream_kbps =
-                       dc_bandwidth_in_kbps_from_timing(&stream->timing,
-                               dc_link_get_highest_encoding_format(stream->link));
-
-               pbn = kbps_to_peak_pbn(stream_kbps);
-               pbn_div = dm_mst_get_pbn_divider(stream->link);
-               slot_num = DIV_ROUND_UP(pbn, pbn_div);
-
-               link_encoding = dc_link_get_highest_encoding_format(stream->link);
-               if (link_encoding == DC_LINK_ENCODING_DP_8b_10b)
-                       max_slot_num = 63;
-               else if (link_encoding == DC_LINK_ENCODING_DP_128b_132b)
-                       max_slot_num = 64;
-               else {
-                       DRM_DEBUG_DRIVER("Invalid link encoding format\n");
+               /* check if mode could be supported within full_pbn */
+               bpp = convert_dc_color_depth_into_bpc(stream->timing.display_color_depth) * 3;
+               pbn = drm_dp_calc_pbn_mode(stream->timing.pix_clk_100hz / 10, bpp << 4);
+               if (pbn > aconnector->mst_output_port->full_pbn)
                        return DC_FAIL_BANDWIDTH_VALIDATE;
-               }
-
-               if (slot_num > max_slot_num ||
-                       pbn > aconnector->mst_output_port->full_pbn) {
-                       DRM_DEBUG_DRIVER("Mode can not be supported within mst links!");
-                       return DC_FAIL_BANDWIDTH_VALIDATE;
-               }
        }

        /* check is mst dsc output bandwidth branch_overall_throughput_0_mps */
--
2.45.2




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux