re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated. Reported-by: Karel Balej <balejk@xxxxxxxxx> Closes: https://lore.kernel.org/linux-usb/D3CKQQAETH47.1MUO22RTCH2O3@xxxxxxxxx/ Cc: stable@xxxxxxxxxxxxxxx Fixes: 651aaf36a7d7 ("usb: xhci: Handle USB transaction error on address command") Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> --- drivers/usb/host/xhci.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 0a8cf6c17f82..efdf4c228b8c 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2837,7 +2837,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, xhci->num_active_eps); return -ENOMEM; } - if ((xhci->quirks & XHCI_SW_BW_CHECKING) && + if ((xhci->quirks & XHCI_SW_BW_CHECKING) && !ctx_change && xhci_reserve_bandwidth(xhci, virt_dev, command->in_ctx)) { if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) xhci_free_host_resources(xhci, ctrl_ctx); @@ -4200,8 +4200,10 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, mutex_unlock(&xhci->mutex); ret = xhci_disable_slot(xhci, udev->slot_id); xhci_free_virt_device(xhci, udev->slot_id); - if (!ret) - xhci_alloc_dev(hcd, udev); + if (!ret) { + if (xhci_alloc_dev(hcd, udev) == 1) + xhci_setup_addressable_virt_dev(xhci, udev); + } kfree(command->completion); kfree(command); return -EPROTO; -- 2.25.1
