5.15-stable review patch. If anyone has any objections, please let me know. ------------------ From: Jisheng Zhang <jszhang@xxxxxxxxxx> commit 815953dc2011ad7a34de355dfa703dcef1085219 upstream If a host that uses the IP's integrated MSI Receiver lost power during suspend, we call dw_pcie_setup_rc() to reinit the RC. But dw_pcie_setup_rc() always sets pp->irq_mask[ctrl] to ~0, so the mask register is always set as 0xffffffff incorrectly, thus the MSI can't work after resume. Fix this issue by moving pp->irq_mask[ctrl] initialization to dw_pcie_host_init() so we can correctly set the mask reg during both boot and resume. Tested-by: Richard Zhu <hongxing.zhu@xxxxxxx> Link: https://lore.kernel.org/r/20211226074019.2556-1-jszhang@xxxxxxxxxx Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxx> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/pci/controller/dwc/pcie-designware-host.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -352,6 +352,12 @@ int dw_pcie_host_init(struct pcie_port * if (ret < 0) return ret; } else if (pp->has_msi_ctrl) { + u32 ctrl, num_ctrls; + + num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL; + for (ctrl = 0; ctrl < num_ctrls; ctrl++) + pp->irq_mask[ctrl] = ~0; + if (!pp->msi_irq) { pp->msi_irq = platform_get_irq_byname_optional(pdev, "msi"); if (pp->msi_irq < 0) { @@ -550,7 +556,6 @@ void dw_pcie_setup_rc(struct pcie_port * /* Initialize IRQ Status array */ for (ctrl = 0; ctrl < num_ctrls; ctrl++) { - pp->irq_mask[ctrl] = ~0; dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_MASK + (ctrl * MSI_REG_CTRL_BLOCK_SIZE), pp->irq_mask[ctrl]);
