6.6-stable review patch. If anyone has any objections, please let me know. ------------------ From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx> [ Upstream commit 9183c6f1a21e0da4415762c504e2d7f784304d12 ] Logitech C922 internal SOF does not increases at a stable rate of 1kHz. This causes that the device_sof and the host_sof run at different rates, breaking the clock domain conversion algorithm. Eg: 30 (6) [-] none 30 614400 B 21.245557 21.395214 34.133 fps ts mono/SoE 31 (7) [-] none 31 614400 B 21.275327 21.427246 33.591 fps ts mono/SoE 32 (0) [-] none 32 614400 B 21.304739 21.459256 34.000 fps ts mono/SoE 33 (1) [-] none 33 614400 B 21.334324 21.495274 33.801 fps ts mono/SoE * 34 (2) [-] none 34 614400 B 21.529237 21.527297 5.130 fps ts mono/SoE * 35 (3) [-] none 35 614400 B 21.649416 21.559306 8.321 fps ts mono/SoE 36 (4) [-] none 36 614400 B 21.678789 21.595320 34.045 fps ts mono/SoE ... 99 (3) [-] none 99 614400 B 23.542226 23.696352 33.541 fps ts mono/SoE 100 (4) [-] none 100 614400 B 23.571578 23.728404 34.069 fps ts mono/SoE 101 (5) [-] none 101 614400 B 23.601425 23.760420 33.504 fps ts mono/SoE * 102 (6) [-] none 102 614400 B 23.798324 23.796428 5.079 fps ts mono/SoE * 103 (7) [-] none 103 614400 B 23.916271 23.828450 8.478 fps ts mono/SoE 104 (0) [-] none 104 614400 B 23.945720 23.860479 33.957 fps ts mono/SoE Instead of disabling completely the hardware timestamping for such hardware we take the assumption that the packet handling jitter is under 2ms and use the host_sof as dev_sof. We can think of the UVC hardware clock as a system with a coarse clock (the SOF) and a fine clock (the PTS). The coarse clock can be replaced with a clock on the same frequency, if the jitter of such clock is smaller than its sampling rate. That way we can save some of the precision of the fine clock. To probe this point we have run three experiments on the Logitech C922. On that experiment we run the camera at 33fps and we analyse the difference in msec between a frame and its predecessor. If we display the histogram of that value, a thinner histogram will mean a better meassurement. The results for: - original hw timestamp: https://ibb.co/D1HJJ4x - pure software timestamp: https://ibb.co/QC9MgVK - modified hw timestamp: https://ibb.co/8s9dBdk This bug in the camera firmware has been confirmed by the vendor. lsusb -v Bus 001 Device 044: ID 046d:085c Logitech, Inc. C922 Pro Stream Webcam Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x046d Logitech, Inc. idProduct 0x085c C922 Pro Stream Webcam bcdDevice 0.16 iManufacturer 0 iProduct 2 C922 Pro Stream Webcam iSerial 1 80B912DF bNumConfigurations 1 Reviewed-by: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx> Reviewed-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx> Signed-off-by: Oleksandr Natalenko <oleksandr@xxxxxxxxxxxxxx> Reviewed-by: Tomasz Figa <tfiga@xxxxxxxxxxxx> Link: https://lore.kernel.org/r/20240323-resend-hwtimestamp-v10-3-b08e590d97c7@xxxxxxxxxxxx Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Stable-dep-of: 85fbe91a7c92 ("media: uvcvideo: Add quirk for invalid dev_sof in Logitech C920") Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/media/usb/uvc/uvc_driver.c | 9 +++++++++ drivers/media/usb/uvc/uvc_video.c | 11 +++++++++++ drivers/media/usb/uvc/uvcvideo.h | 1 + 3 files changed, 21 insertions(+) diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index 69602f2ed51d8..664a1b7314197 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -2581,6 +2581,15 @@ static const struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_INFO_QUIRK(UVC_QUIRK_RESTORE_CTRLS_ON_INIT) }, + /* Logitech HD Pro Webcam C922 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x085c, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_INFO_QUIRK(UVC_QUIRK_INVALID_DEVICE_SOF) }, /* Logitech Rally Bar Huddle */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c index 28dde08ec6c5d..860a21446529a 100644 --- a/drivers/media/usb/uvc/uvc_video.c +++ b/drivers/media/usb/uvc/uvc_video.c @@ -529,6 +529,17 @@ uvc_video_clock_decode(struct uvc_streaming *stream, struct uvc_buffer *buf, stream->clock.last_sof = dev_sof; host_sof = usb_get_current_frame_number(stream->dev->udev); + + /* + * On some devices, like the Logitech C922, the device SOF does not run + * at a stable rate of 1kHz. For those devices use the host SOF instead. + * In the tests performed so far, this improves the timestamp precision. + * This is probably explained by a small packet handling jitter from the + * host, but the exact reason hasn't been fully determined. + */ + if (stream->dev->quirks & UVC_QUIRK_INVALID_DEVICE_SOF) + dev_sof = host_sof; + time = uvc_video_get_time(); /* diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h index 3653b2c8a86cb..e5b12717016fa 100644 --- a/drivers/media/usb/uvc/uvcvideo.h +++ b/drivers/media/usb/uvc/uvcvideo.h @@ -75,6 +75,7 @@ #define UVC_QUIRK_WAKE_AUTOSUSPEND 0x00002000 #define UVC_QUIRK_NO_RESET_RESUME 0x00004000 #define UVC_QUIRK_DISABLE_AUTOSUSPEND 0x00008000 +#define UVC_QUIRK_INVALID_DEVICE_SOF 0x00010000 /* Format flags */ #define UVC_FMT_FLAG_COMPRESSED 0x00000001 -- 2.43.0
