6.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: P Praneesh <quic_ppranees@xxxxxxxxxxx>
[ Upstream commit a57ab7cced454f69b8ee8aa5f5019ea8de4674da ]
When handling fragmented packets, the ath12k driver reassembles each
fragment into a normal packet and then reinjects it into the HW ring.
However, a firmware crash occurs during this reinjection process.
The issue arises because the driver populates peer metadata in
reo_ent_ring->queue_addr_lo, while the firmware expects the physical
address obtained from the corresponding peer’s queue descriptor. Fix it
by filling peer's queue descriptor's physical address in queue_addr_lo.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: P Praneesh <quic_ppranees@xxxxxxxxxxx>
Acked-by: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
Signed-off-by: Kalle Valo <quic_kvalo@xxxxxxxxxxx>
Link: https://msgid.link/20240520070045.631029-4-quic_ppranees@xxxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/wireless/ath/ath12k/dp_rx.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/dp_rx.c b/drivers/net/wireless/ath/ath12k/dp_rx.c
index 37e5bca9570fe..44e8d9d7834c4 100644
--- a/drivers/net/wireless/ath/ath12k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath12k/dp_rx.c
@@ -2994,7 +2994,7 @@ static int ath12k_dp_rx_h_defrag_reo_reinject(struct ath12k *ar,
struct hal_srng *srng;
dma_addr_t link_paddr, buf_paddr;
u32 desc_bank, msdu_info, msdu_ext_info, mpdu_info;
- u32 cookie, hal_rx_desc_sz, dest_ring_info0;
+ u32 cookie, hal_rx_desc_sz, dest_ring_info0, queue_addr_hi;
int ret;
struct ath12k_rx_desc_info *desc_info;
u8 dst_ind;
@@ -3086,13 +3086,11 @@ static int ath12k_dp_rx_h_defrag_reo_reinject(struct ath12k *ar,
reo_ent_ring->rx_mpdu_info.peer_meta_data =
reo_dest_ring->rx_mpdu_info.peer_meta_data;
- /* Firmware expects physical address to be filled in queue_addr_lo in
- * the MLO scenario and in case of non MLO peer meta data needs to be
- * filled.
- * TODO: Need to handle for MLO scenario.
- */
- reo_ent_ring->queue_addr_lo = reo_dest_ring->rx_mpdu_info.peer_meta_data;
- reo_ent_ring->info0 = le32_encode_bits(dst_ind,
+ reo_ent_ring->queue_addr_lo = cpu_to_le32(lower_32_bits(rx_tid->paddr));
+ queue_addr_hi = upper_32_bits(rx_tid->paddr);
+ reo_ent_ring->info0 = le32_encode_bits(queue_addr_hi,
+ HAL_REO_ENTR_RING_INFO0_QUEUE_ADDR_HI) |
+ le32_encode_bits(dst_ind,
HAL_REO_ENTR_RING_INFO0_DEST_IND);
reo_ent_ring->info1 = le32_encode_bits(rx_tid->cur_sn,
--
2.43.0
