6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
[ Upstream commit 9ffa0e70b2daf9b0271e4960b7c8a2350e2cda08 ]
After 6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to
use add_bus"), ks_pcie_v3_65_add_bus() enabled BAR 0 for both v3.65a and
v4.90a devices. On the AM654x SoC, which uses v4.90a, enabling BAR 0
causes Completion Timeouts when setting up MSI-X. These timeouts delay
boot of the AM654x by about 45 seconds.
Move the BAR 0 initialization to ks_pcie_msi_host_init(), which is only
used for v3.65a devices, and remove ks_pcie_v3_65_add_bus().
[bhelgaas: commit log]
Fixes: 6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus")
Link: https://lore.kernel.org/linux-pci/20240328085041.2916899-3-s-vadapalli@xxxxxx
Suggested-by: Bjorn Helgaas <helgaas@xxxxxxxxxx>
Suggested-by: Niklas Cassel <cassel@xxxxxxxxxx>
Suggested-by: Serge Semin <fancer.lancer@xxxxxxxxx>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@xxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Reviewed-by: Niklas Cassel <cassel@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/pci/controller/dwc/pci-keystone.c | 52 ++++++++---------------
1 file changed, 18 insertions(+), 34 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 348a9f755d0ba..438aa5fa4c64b 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -291,6 +291,24 @@ static void ks_pcie_clear_dbi_mode(struct keystone_pcie *ks_pcie)
static int ks_pcie_msi_host_init(struct dw_pcie_rp *pp)
{
+ struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+
+ /* Configure and set up BAR0 */
+ ks_pcie_set_dbi_mode(ks_pcie);
+
+ /* Enable BAR0 */
+ dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1);
+ dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1);
+
+ ks_pcie_clear_dbi_mode(ks_pcie);
+
+ /*
+ * For BAR0, just setting bus address for inbound writes (MSI) should
+ * be sufficient. Use physical address to avoid any conflicts.
+ */
+ dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start);
+
pp->msi_irq_chip = &ks_pcie_msi_irq_chip;
return dw_pcie_allocate_domains(pp);
}
@@ -448,44 +466,10 @@ static struct pci_ops ks_child_pcie_ops = {
.write = pci_generic_config_write,
};
-/**
- * ks_pcie_v3_65_add_bus() - keystone add_bus post initialization
- * @bus: A pointer to the PCI bus structure.
- *
- * This sets BAR0 to enable inbound access for MSI_IRQ register
- */
-static int ks_pcie_v3_65_add_bus(struct pci_bus *bus)
-{
- struct dw_pcie_rp *pp = bus->sysdata;
- struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
- struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
-
- if (!pci_is_root_bus(bus))
- return 0;
-
- /* Configure and set up BAR0 */
- ks_pcie_set_dbi_mode(ks_pcie);
-
- /* Enable BAR0 */
- dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1);
- dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1);
-
- ks_pcie_clear_dbi_mode(ks_pcie);
-
- /*
- * For BAR0, just setting bus address for inbound writes (MSI) should
- * be sufficient. Use physical address to avoid any conflicts.
- */
- dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start);
-
- return 0;
-}
-
static struct pci_ops ks_pcie_ops = {
.map_bus = dw_pcie_own_conf_map_bus,
.read = pci_generic_config_read,
.write = pci_generic_config_write,
- .add_bus = ks_pcie_v3_65_add_bus,
};
/**
--
2.43.0
