[PATCH v2 2/2] dmaengine: dw-edma: Do not enable watermark interrupts for HDMA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



DW_HDMA_V0_LIE and DW_HDMA_V0_RIE are initialized as BIT(3) and BIT(4)
respectively in dw_hdma_control enum. But as per HDMA register these
bits are corresponds to LWIE and RWIE bit i.e local watermark interrupt
enable and remote watermarek interrupt enable. In linked list mode LWIE
and RWIE bits only enable the local and remote watermark interrupt.

Since the watermark interrupts are not used but enabled, this leads to
spurious interrupts getting generated. So remove the code that enables
them to avoid generating spurious watermark interrupts.

And also rename DW_HDMA_V0_LIE to DW_HDMA_V0_LWIE and DW_HDMA_V0_RIE to
DW_HDMA_V0_RWIE as there is no LIE and RIE bits in HDMA and those bits
are corresponds to LWIE and RWIE bits.

Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
---
 drivers/dma/dw-edma/dw-hdma-v0-core.c | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)

diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c
index fa89b3a..9ad2e28 100644
--- a/drivers/dma/dw-edma/dw-hdma-v0-core.c
+++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c
@@ -17,8 +17,8 @@ enum dw_hdma_control {
 	DW_HDMA_V0_CB					= BIT(0),
 	DW_HDMA_V0_TCB					= BIT(1),
 	DW_HDMA_V0_LLP					= BIT(2),
-	DW_HDMA_V0_LIE					= BIT(3),
-	DW_HDMA_V0_RIE					= BIT(4),
+	DW_HDMA_V0_LWIE					= BIT(3),
+	DW_HDMA_V0_RWIE					= BIT(4),
 	DW_HDMA_V0_CCS					= BIT(8),
 	DW_HDMA_V0_LLE					= BIT(9),
 };
@@ -195,25 +195,14 @@ static void dw_hdma_v0_write_ll_link(struct dw_edma_chunk *chunk,
 static void dw_hdma_v0_core_write_chunk(struct dw_edma_chunk *chunk)
 {
 	struct dw_edma_burst *child;
-	struct dw_edma_chan *chan = chunk->chan;
 	u32 control = 0, i = 0;
-	int j;
 
 	if (chunk->cb)
 		control = DW_HDMA_V0_CB;
 
-	j = chunk->bursts_alloc;
-	list_for_each_entry(child, &chunk->burst->list, list) {
-		j--;
-		if (!j) {
-			control |= DW_HDMA_V0_LIE;
-			if (!(chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL))
-				control |= DW_HDMA_V0_RIE;
-		}
-
+	list_for_each_entry(child, &chunk->burst->list, list)
 		dw_hdma_v0_write_ll_data(chunk, i++, control, child->sz,
 					 child->sar, child->dar);
-	}
 
 	control = DW_HDMA_V0_LLP | DW_HDMA_V0_TCB;
 	if (!chunk->cb)
-- 
2.7.4





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux