The patch below does not apply to the 3.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable@xxxxxxxxxxxxxxx>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 8117ac6a6c2fa0f847ff6a21a1f32c8d2c8501d0 Mon Sep 17 00:00:00 2001 From: Paul Mackerras <paulus@xxxxxxxxx> Date: Wed, 10 Dec 2014 00:26:50 +0530 Subject: [PATCH] powerpc/powernv: Switch off MMU before entering nap/sleep/rvwinkle mode Currently, when going idle, we set the flag indicating that we are in nap mode (paca->kvm_hstate.hwthread_state) and then execute the nap (or sleep or rvwinkle) instruction, all with the MMU on. This is bad for two reasons: (a) the architecture specifies that those instructions must be executed with the MMU off, and in fact with only the SF, HV, ME and possibly RI bits set, and (b) this introduces a race, because as soon as we set the flag, another thread can switch the MMU to a guest context. If the race is lost, this thread will typically start looping on relocation-on ISIs at 0xc...4400. This fixes it by setting the MSR as required by the architecture before setting the flag or executing the nap/sleep/rvwinkle instruction. Cc: stable@xxxxxxxxxxxxxxx [ shreyas@xxxxxxxxxxxxxxxxxx: Edited to handle LE ] Signed-off-by: Paul Mackerras <paulus@xxxxxxxxx> Signed-off-by: Shreyas B. Prabhu <shreyas@xxxxxxxxxxxxxxxxxx> Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx> Cc: Michael Ellerman <mpe@xxxxxxxxxxxxxx> Cc: linuxppc-dev@xxxxxxxxxxxxxxxx Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx> diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index c998279bd85b..a68ee15964b3 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -118,8 +118,10 @@ #define __MSR (MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV) #ifdef __BIG_ENDIAN__ #define MSR_ __MSR +#define MSR_IDLE (MSR_ME | MSR_SF | MSR_HV) #else #define MSR_ (__MSR | MSR_LE) +#define MSR_IDLE (MSR_ME | MSR_SF | MSR_HV | MSR_LE) #endif #define MSR_KERNEL (MSR_ | MSR_64BIT) #define MSR_USER32 (MSR_ | MSR_PR | MSR_EE) diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index 18c0687e5ab3..e5aba6abbe6c 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -101,7 +101,23 @@ _GLOBAL(power7_powersave_common) std r9,_MSR(r1) std r1,PACAR1(r13) -_GLOBAL(power7_enter_nap_mode) + /* + * Go to real mode to do the nap, as required by the architecture. + * Also, we need to be in real mode before setting hwthread_state, + * because as soon as we do that, another thread can switch + * the MMU context to the guest. + */ + LOAD_REG_IMMEDIATE(r5, MSR_IDLE) + li r6, MSR_RI + andc r6, r9, r6 + LOAD_REG_ADDR(r7, power7_enter_nap_mode) + mtmsrd r6, 1 /* clear RI before setting SRR0/1 */ + mtspr SPRN_SRR0, r7 + mtspr SPRN_SRR1, r5 + rfid + + .globl power7_enter_nap_mode +power7_enter_nap_mode: #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE /* Tell KVM we're napping */ li r4,KVM_HWTHREAD_IN_NAP -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html