Re: [PATCH iwl-net v2 1/3] igc: Fix qbv_config_change_errors logics

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Faizal Rahim <faizal.abdul.rahim@xxxxxxxxxxxxxxx> writes:

> When user issues these cmds:
> 1. Either a) or b)
>    a) mqprio with hardware offload disabled
>    b) taprio with txtime-assist feature enabled
> 2. etf
> 3. tc qdisc delete
> 4. taprio with base time in the past
>
> At step 4, qbv_config_change_errors wrongly increased by 1.
>
> Excerpt from IEEE 802.1Q-2018 8.6.9.3.1:
> "If AdminBaseTime specifies a time in the past, and the current schedule
> is running, then: Increment ConfigChangeError counter"
>
> qbv_config_change_errors should only increase if base time is in the past
> and no taprio is active. In user perspective, taprio was not active when
> first triggered at step 4. However, i225/6 reuses qbv for etf, so qbv is
> enabled with a dummy schedule at step 2 where it enters
> igc_tsn_enable_offload() and qbv_count got incremented to 1. At step 4, it
> enters igc_tsn_enable_offload() again, qbv_count is incremented to 2.
> Because taprio is running, tc_setup_type is TC_SETUP_QDISC_ETF and
> qbv_count > 1, qbv_config_change_errors value got incremented.
>
> This issue happens due to reliance on qbv_count field where a non-zero
> value indicates that taprio is running. But qbv_count increases
> regardless if taprio is triggered by user or by other tsn feature. It does
> not align with qbv_config_change_errors expectation where it is only
> concerned with taprio triggered by user.
>
> Fixing this by relocating the qbv_config_change_errors logic to
> igc_save_qbv_schedule(), eliminating reliance on qbv_count and its
> inaccuracies from i225/6's multiple uses of qbv feature for other TSN
> features.
>
> The new function created: igc_tsn_is_taprio_activated_by_user() uses
> taprio_offload_enable field to indicate that the current running taprio
> was triggered by user, instead of triggered by non-qbv feature like etf.
>
> Fixes: ae4fe4698300 ("igc: Add qbv_config_change_errors counter")
> Signed-off-by: Faizal Rahim <faizal.abdul.rahim@xxxxxxxxxxxxxxx>
> Reviewed-by: Simon Horman <horms@xxxxxxxxxx>
> ---

Looks good:

Acked-by: Vinicius Costa Gomes <vinicius.gomes@xxxxxxxxx>


Cheers,
-- 
Vinicius




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux