From: Ronald Wahl <ronald.wahl@xxxxxxxxxxx>
The amount of TX space in the hardware buffer is tracked in the tx_space
variable. The initial value is currently only set during driver probing.
After closing the interface and reopening it the tx_space variable has
the last value it had before close. If it is smaller than the size of
the first send packet after reopeing the interface the queue will be
stopped. The queue is woken up after receiving a TX interrupt but this
will never happen since we did not send anything.
This commit moves the initialization of the tx_space variable to the
ks8851_net_open function right before starting the TX queue. Also query
the value from the hardware instead of using a hard coded value.
Only the SPI chip variant is affected by this issue because only this
driver variant actually depends on the tx_space variable in the xmit
function.
Fixes: 3dc5d4454545 ("net: ks8851: Fix TX stall caused by TX buffer overrun")
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Eric Dumazet <edumazet@xxxxxxxxxx>
Cc: Jakub Kicinski <kuba@xxxxxxxxxx>
Cc: Paolo Abeni <pabeni@xxxxxxxxxx>
Cc: Simon Horman <horms@xxxxxxxxxx>
Cc: netdev@xxxxxxxxxxxxxxx
Cc: stable@xxxxxxxxxxxxxxx # 5.10+
Signed-off-by: Ronald Wahl <ronald.wahl@xxxxxxxxxxx>
---
drivers/net/ethernet/micrel/ks8851_common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/micrel/ks8851_common.c b/drivers/net/ethernet/micrel/ks8851_common.c
index 6453c92f0fa7..03a554df6e7a 100644
--- a/drivers/net/ethernet/micrel/ks8851_common.c
+++ b/drivers/net/ethernet/micrel/ks8851_common.c
@@ -482,6 +482,7 @@ static int ks8851_net_open(struct net_device *dev)
ks8851_wrreg16(ks, KS_IER, ks->rc_ier);
ks->queued_len = 0;
+ ks->tx_space = ks8851_rdreg16(ks, KS_TXMIR);
netif_start_queue(ks->netdev);
netif_dbg(ks, ifup, ks->netdev, "network device up\n");
@@ -1101,7 +1102,6 @@ int ks8851_probe_common(struct net_device *netdev, struct device *dev,
int ret;
ks->netdev = netdev;
- ks->tx_space = 6144;
ks->gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
ret = PTR_ERR_OR_ZERO(ks->gpio);
--
2.45.2
