3.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Stefan Roese <sr@xxxxxxx> commit 4302a59629f7a0bd70fd1605d2b558597517372a upstream. When used via spidev with more than one messages to tranfer via SPI_IOC_MESSAGE the current implementation would return with -EINVAL, since bits_per_word and speed_hz are set in all transfer structs. And in the 2nd loop status will stay at -EINVAL as its not overwritten again via fsl_spi_setup_transfer(). This patch changes this behavious by first checking if one of the messages uses different settings. If this is the case the function will return with -EINVAL. If not, the messages are transferred correctly. Signed-off-by: Stefan Roese <sr@xxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Cc: Esben Haabendal <esbenhaabendal@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/spi/spi-fsl-spi.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -362,18 +362,28 @@ static int fsl_spi_bufs(struct spi_devic static void fsl_spi_do_one_msg(struct spi_message *m) { struct spi_device *spi = m->spi; - struct spi_transfer *t; + struct spi_transfer *t, *first; unsigned int cs_change; const int nsecs = 50; int status; - cs_change = 1; - status = 0; + /* Don't allow changes if CS is active */ + first = list_first_entry(&m->transfers, struct spi_transfer, + transfer_list); list_for_each_entry(t, &m->transfers, transfer_list) { - if (t->bits_per_word || t->speed_hz) { - /* Don't allow changes if CS is active */ + if ((first->bits_per_word != t->bits_per_word) || + (first->speed_hz != t->speed_hz)) { status = -EINVAL; + dev_err(&spi->dev, + "bits_per_word/speed_hz should be same for the same SPI transfer\n"); + return; + } + } + cs_change = 1; + status = -EINVAL; + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->bits_per_word || t->speed_hz) { if (cs_change) status = fsl_spi_setup_transfer(spi, t); if (status < 0) -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html