[PATCH 6.1 025/128] net: dsa: microchip: use collision based back pressure mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@xxxxxxxxxxxxxxxxxxxx>

[ Upstream commit d963c95bc9840d070a788c35e41b715a648717f7 ]

Errata DS80000758 states that carrier sense back pressure mode can cause
link down issues in 100BASE-TX half duplex mode. The datasheet also
recommends to always use the collision based back pressure mode.

Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Woojung Huh <Woojung.huh@xxxxxxxxxxxxx>
Acked-by: Arun Ramadoss <arun.ramadoss@xxxxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/dsa/microchip/ksz9477.c     | 4 ++++
 drivers/net/dsa/microchip/ksz9477_reg.h | 1 +
 2 files changed, 5 insertions(+)

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 9181be2d8abb2..e9fa92a833227 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1150,6 +1150,10 @@ int ksz9477_setup(struct dsa_switch *ds)
 	/* Enable REG_SW_MTU__2 reg by setting SW_JUMBO_PACKET */
 	ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_JUMBO_PACKET, true);
 
+	/* Use collision based back pressure mode. */
+	ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_BACK_PRESSURE,
+		SW_BACK_PRESSURE_COLLISION);
+
 	/* Now we can configure default MTU value */
 	ret = regmap_update_bits(dev->regmap[1], REG_SW_MTU__2, REG_SW_MTU_MASK,
 				 VLAN_ETH_FRAME_LEN + ETH_FCS_LEN);
diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h
index 53c68d286dd3a..04086e9ab0a0f 100644
--- a/drivers/net/dsa/microchip/ksz9477_reg.h
+++ b/drivers/net/dsa/microchip/ksz9477_reg.h
@@ -267,6 +267,7 @@
 #define REG_SW_MAC_CTRL_1		0x0331
 
 #define SW_BACK_PRESSURE		BIT(5)
+#define SW_BACK_PRESSURE_COLLISION	0
 #define FAIR_FLOW_CTRL			BIT(4)
 #define NO_EXC_COLLISION_DROP		BIT(3)
 #define SW_JUMBO_PACKET			BIT(2)
-- 
2.43.0







[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux