As per Errata i2310[0], Erroneous timeout can be triggered, if this Erroneous interrupt is not cleared then it may leads to storm of interrupts. This patch adding fifo empty check before applying errata. [0] https://www.ti.com/lit/pdf/sprz536 page 23 Fixes: b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs") Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Udit Kumar <u-kumar1@xxxxxx> --- This is check is added on top of errata implementation v3 patch https://lore.kernel.org/all/20240619105903.165434-1-u-kumar1@xxxxxx/ drivers/tty/serial/8250/8250_omap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index ddac0a13cf84..1af9aed99c65 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -672,7 +672,8 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id) * https://www.ti.com/lit/pdf/sprz536 */ if (priv->habit & UART_RX_TIMEOUT_QUIRK && - (iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT) { + (iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT && + serial_port_in(port, UART_OMAP_RX_LVL) == 0) { unsigned char efr2, timeout_h, timeout_l; efr2 = serial_in(up, UART_OMAP_EFR2); -- 2.34.1
