6.1-stable review patch. If anyone has any objections, please let me know. ------------------ From: Volodymyr Babchuk <Volodymyr_Babchuk@xxxxxxxx> [ Upstream commit 819fe8c96a5172dfd960e5945e8f00f8fed32953 ] There are two issues with SDHC2 configuration for SA8155P-ADP, which prevent use of SDHC2 and causes issues with ethernet: - Card Detect pin for SHDC2 on SA8155P-ADP is connected to gpio4 of PMM8155AU_1, not to SoC itself. SoC's gpio4 is used for DWMAC TX. If sdhc driver probes after dwmac driver, it reconfigures gpio4 and this breaks Ethernet MAC. - pinctrl configuration mentions gpio96 as CD pin. It seems it was copied from some SM8150 example, because as mentioned above, correct CD pin is gpio4 on PMM8155AU_1. This patch fixes both mentioned issues by providing correct pin handle and pinctrl configuration. Fixes: 0deb2624e2d0 ("arm64: dts: qcom: sa8155p-adp: Add support for uSD card") Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@xxxxxxxx> Reviewed-by: Stephan Gerhold <stephan@xxxxxxxxxxx> Link: https://lore.kernel.org/r/20240412190310.1647893-1-volodymyr_babchuk@xxxxxxxx Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 30 ++++++++++-------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 01ac460d910ec..cbec4c9f31025 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -372,6 +372,16 @@ rgmii_phy: phy@7 { }; }; +&pmm8155au_1_gpios { + pmm8155au_1_sdc2_cd: sdc2-cd-default-state { + pins = "gpio4"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + }; +}; + &qupv3_id_1 { status = "okay"; }; @@ -389,10 +399,10 @@ &remoteproc_cdsp { &sdhc_2 { status = "okay"; - cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + cd-gpios = <&pmm8155au_1_gpios 4 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_on>; - pinctrl-1 = <&sdc2_off>; + pinctrl-0 = <&sdc2_on &pmm8155au_1_sdc2_cd>; + pinctrl-1 = <&sdc2_off &pmm8155au_1_sdc2_cd>; vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */ vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */ bus-width = <4>; @@ -506,13 +516,6 @@ data-pins { bias-pull-up; /* pull up */ drive-strength = <16>; /* 16 MA */ }; - - sd-cd-pins { - pins = "gpio96"; - function = "gpio"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; }; sdc2_off: sdc2-off-state { @@ -533,13 +536,6 @@ data-pins { bias-pull-up; /* pull up */ drive-strength = <2>; /* 2 MA */ }; - - sd-cd-pins { - pins = "gpio96"; - function = "gpio"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; }; usb2phy_ac_en1_default: usb2phy-ac-en1-default-state { -- 2.43.0