6.1-stable review patch. If anyone has any objections, please let me know. ------------------ From: Johan Hovold <johan+linaro@xxxxxxxxxx> [ Upstream commit 32868e126c78876a8a5ddfcb6ac8cb2fffcf4d27 ] Qualcomm Bluetooth controllers may not have been provisioned with a valid device address and instead end up using the default address 00:00:00:00:5a:ad. This was previously believed to be due to lack of persistent storage for the address but it may also be due to integrators opting to not use the on-chip OTP memory and instead store the address elsewhere (e.g. in storage managed by secure world firmware). According to Qualcomm, at least WCN6750, WCN6855 and WCN7850 have on-chip OTP storage for the address. As the device type alone cannot be used to determine when the address is valid, instead read back the address during setup() and only set the HCI_QUIRK_USE_BDADDR_PROPERTY flag when needed. This specifically makes sure that controllers that have been provisioned with an address do not start as unconfigured. Reported-by: Janaki Ramaiah Thota <quic_janathot@xxxxxxxxxxx> Link: https://lore.kernel.org/r/124a7d54-5a18-4be7-9a76-a12017f6cce5@xxxxxxxxxxx/ Fixes: 5971752de44c ("Bluetooth: hci_qca: Set HCI_QUIRK_USE_BDADDR_PROPERTY for wcn3990") Fixes: e668eb1e1578 ("Bluetooth: hci_core: Don't stop BT if the BD address missing in dts") Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk") Cc: stable@xxxxxxxxxxxxxxx # 6.5 Cc: Matthias Kaehlcke <mka@xxxxxxxxxxxx> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx> Reported-by: Janaki Ramaiah Thota <quic_janathot@xxxxxxxxxxx> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/bluetooth/btqca.c | 38 +++++++++++++++++++++++++++++++++++++ drivers/bluetooth/hci_qca.c | 2 -- 2 files changed, 38 insertions(+), 2 deletions(-) diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c index 2dda94a0875a6..8df2e53dcd63c 100644 --- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -15,6 +15,8 @@ #define VERSION "0.1" +#define QCA_BDADDR_DEFAULT (&(bdaddr_t) {{ 0xad, 0x5a, 0x00, 0x00, 0x00, 0x00 }}) + int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver, enum qca_btsoc_type soc_type) { @@ -682,6 +684,38 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr) } EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome); +static int qca_check_bdaddr(struct hci_dev *hdev) +{ + struct hci_rp_read_bd_addr *bda; + struct sk_buff *skb; + int err; + + if (bacmp(&hdev->public_addr, BDADDR_ANY)) + return 0; + + skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + bt_dev_err(hdev, "Failed to read device address (%d)", err); + return err; + } + + if (skb->len != sizeof(*bda)) { + bt_dev_err(hdev, "Device address length mismatch"); + kfree_skb(skb); + return -EIO; + } + + bda = (struct hci_rp_read_bd_addr *)skb->data; + if (!bacmp(&bda->bdaddr, QCA_BDADDR_DEFAULT)) + set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks); + + kfree_skb(skb); + + return 0; +} + static void qca_generate_hsp_nvm_name(char *fwname, size_t max_size, struct qca_btsoc_version ver, u8 rom_ver, u16 bid) { @@ -888,6 +922,10 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, break; } + err = qca_check_bdaddr(hdev); + if (err) + return err; + bt_dev_info(hdev, "QCA setup on UART is completed"); return 0; diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index a0e2b5d992695..070014d0fc994 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -1853,8 +1853,6 @@ static int qca_setup(struct hci_uart *hu) case QCA_WCN6750: case QCA_WCN6855: case QCA_WCN7850: - set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks); - qcadev = serdev_device_get_drvdata(hu->serdev); if (qcadev->bdaddr_property_broken) set_bit(HCI_QUIRK_BDADDR_PROPERTY_BROKEN, &hdev->quirks); -- 2.43.0
