6.6-stable review patch. If anyone has any objections, please let me know. ------------------ From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> [ Upstream commit e6a46d073e11baba785245860c9f51adbbb8b68d ] Since we have now a common helper to read port properties use it instead of sparse home grown solution. Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20240304123035.758700-8-andriy.shevchenko@xxxxxxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Stable-dep-of: 87d80bfbd577 ("serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw") Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/tty/serial/8250/8250_dw.c | 67 +++++++++++++------------------ 1 file changed, 27 insertions(+), 40 deletions(-) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index a1f2259cc9a98..0446ac145cd4a 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -17,7 +17,6 @@ #include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/notifier.h> -#include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/property.h> @@ -449,12 +448,7 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) if (np) { unsigned int quirks = data->pdata->quirks; - int id; - /* get index of serial line, if found in DT aliases */ - id = of_alias_get_id(np, "serial"); - if (id >= 0) - p->line = id; #ifdef CONFIG_64BIT if (quirks & DW_UART_QUIRK_OCTEON) { p->serial_in = dw8250_serial_inq; @@ -465,12 +459,6 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) } #endif - if (of_device_is_big_endian(np)) { - p->iotype = UPIO_MEM32BE; - p->serial_in = dw8250_serial_in32be; - p->serial_out = dw8250_serial_out32be; - } - if (quirks & DW_UART_QUIRK_ARMADA_38X) p->serial_out = dw8250_serial_out38x; if (quirks & DW_UART_QUIRK_SKIP_SET_RATE) @@ -515,39 +503,21 @@ static int dw8250_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct dw8250_data *data; struct resource *regs; - int irq; int err; - u32 val; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) return dev_err_probe(dev, -EINVAL, "no registers defined\n"); - irq = platform_get_irq_optional(pdev, 0); - /* no interrupt -> fall back to polling */ - if (irq == -ENXIO) - irq = 0; - if (irq < 0) - return irq; - spin_lock_init(&p->lock); - p->mapbase = regs->start; - p->irq = irq; p->handle_irq = dw8250_handle_irq; p->pm = dw8250_do_pm; p->type = PORT_8250; - p->flags = UPF_SHARE_IRQ | UPF_FIXED_PORT; + p->flags = UPF_FIXED_PORT; p->dev = dev; - p->iotype = UPIO_MEM; - p->serial_in = dw8250_serial_in; - p->serial_out = dw8250_serial_out; p->set_ldisc = dw8250_set_ldisc; p->set_termios = dw8250_set_termios; - p->membase = devm_ioremap(dev, regs->start, resource_size(regs)); - if (!p->membase) - return -ENOMEM; - data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; @@ -559,15 +529,35 @@ static int dw8250_probe(struct platform_device *pdev) data->uart_16550_compatible = device_property_read_bool(dev, "snps,uart-16550-compatible"); - err = device_property_read_u32(dev, "reg-shift", &val); - if (!err) - p->regshift = val; + p->mapbase = regs->start; + p->mapsize = resource_size(regs); - err = device_property_read_u32(dev, "reg-io-width", &val); - if (!err && val == 4) { - p->iotype = UPIO_MEM32; + p->membase = devm_ioremap(dev, p->mapbase, p->mapsize); + if (!p->membase) + return -ENOMEM; + + err = uart_read_port_properties(p); + /* no interrupt -> fall back to polling */ + if (err == -ENXIO) + err = 0; + if (err) + return err; + + switch (p->iotype) { + case UPIO_MEM: + p->serial_in = dw8250_serial_in; + p->serial_out = dw8250_serial_out; + break; + case UPIO_MEM32: p->serial_in = dw8250_serial_in32; p->serial_out = dw8250_serial_out32; + break; + case UPIO_MEM32BE: + p->serial_in = dw8250_serial_in32be; + p->serial_out = dw8250_serial_out32be; + break; + default: + return -ENODEV; } if (device_property_read_bool(dev, "dcd-override")) { @@ -594,9 +584,6 @@ static int dw8250_probe(struct platform_device *pdev) data->msr_mask_off |= UART_MSR_TERI; } - /* Always ask for fixed clock rate from a property. */ - device_property_read_u32(dev, "clock-frequency", &p->uartclk); - /* If there is separate baudclk, get the rate from it. */ data->clk = devm_clk_get_optional(dev, "baudclk"); if (data->clk == NULL) -- 2.43.0
