6.6-stable review patch. If anyone has any objections, please let me know. ------------------ From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> [ Upstream commit 87d80bfbd577912462061b1a45c0ed9c7fcb872f ] The container of the struct dw8250_port_data is private to the actual driver. In particular, 8250_lpss and 8250_dw use different data types that are assigned to the UART port private_data. Hence, it must not be used outside the specific driver. Currently the only cpr_val is required by the common code, make it be available via struct dw8250_port_data. This fixes the UART breakage on Intel Galileo boards. Fixes: 593dea000bc1 ("serial: 8250: dw: Allow to use a fallback CPR value if not synthesized") Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20240514190730.2787071-2-andriy.shevchenko@xxxxxxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/tty/serial/8250/8250_dw.c | 9 +++++++-- drivers/tty/serial/8250/8250_dwlib.c | 3 +-- drivers/tty/serial/8250/8250_dwlib.h | 3 ++- 3 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index a7659e536d3c0..777bea835b114 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -55,6 +55,7 @@ #define DW_UART_QUIRK_SKIP_SET_RATE BIT(2) #define DW_UART_QUIRK_IS_DMA_FC BIT(3) #define DW_UART_QUIRK_APMC0D08 BIT(4) +#define DW_UART_QUIRK_CPR_VALUE BIT(5) static inline struct dw8250_data *clk_to_dw8250_data(struct notifier_block *nb) { @@ -445,6 +446,10 @@ static void dw8250_prepare_rx_dma(struct uart_8250_port *p) static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) { unsigned int quirks = data->pdata ? data->pdata->quirks : 0; + u32 cpr_value = data->pdata ? data->pdata->cpr_value : 0; + + if (quirks & DW_UART_QUIRK_CPR_VALUE) + data->data.cpr_value = cpr_value; #ifdef CONFIG_64BIT if (quirks & DW_UART_QUIRK_OCTEON) { @@ -749,8 +754,8 @@ static const struct dw8250_platform_data dw8250_armada_38x_data = { static const struct dw8250_platform_data dw8250_renesas_rzn1_data = { .usr_reg = DW_UART_USR, - .cpr_val = 0x00012f32, - .quirks = DW_UART_QUIRK_IS_DMA_FC, + .cpr_value = 0x00012f32, + .quirks = DW_UART_QUIRK_CPR_VALUE | DW_UART_QUIRK_IS_DMA_FC, }; static const struct dw8250_platform_data dw8250_starfive_jh7100_data = { diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c index 84843e204a5e8..8fc8b6753148b 100644 --- a/drivers/tty/serial/8250/8250_dwlib.c +++ b/drivers/tty/serial/8250/8250_dwlib.c @@ -242,7 +242,6 @@ static const struct serial_rs485 dw8250_rs485_supported = { void dw8250_setup_port(struct uart_port *p) { struct dw8250_port_data *pd = p->private_data; - struct dw8250_data *data = to_dw8250_data(pd); struct uart_8250_port *up = up_to_u8250p(p); u32 reg, old_dlf; @@ -284,7 +283,7 @@ void dw8250_setup_port(struct uart_port *p) reg = dw8250_readl_ext(p, DW_UART_CPR); if (!reg) { - reg = data->pdata->cpr_val; + reg = pd->cpr_value; dev_dbg(p->dev, "CPR is not available, using 0x%08x instead\n", reg); } if (!reg) diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h index f13e91f2cace9..794a9014cdac1 100644 --- a/drivers/tty/serial/8250/8250_dwlib.h +++ b/drivers/tty/serial/8250/8250_dwlib.h @@ -19,6 +19,7 @@ struct dw8250_port_data { struct uart_8250_dma dma; /* Hardware configuration */ + u32 cpr_value; u8 dlf_size; /* RS485 variables */ @@ -27,7 +28,7 @@ struct dw8250_port_data { struct dw8250_platform_data { u8 usr_reg; - u32 cpr_val; + u32 cpr_value; unsigned int quirks; }; -- 2.43.0