In case this PHY is bootstrapped for managed mode, we need to manually
wake it. Otherwise no link will be detected.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: cb80ee2f9bee1 ("net: phy: Add support for the DP83TG720S Ethernet PHY")
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
drivers/net/phy/dp83tg720.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/dp83tg720.c b/drivers/net/phy/dp83tg720.c
index 326c9770a6dcc..1186dfc70fb3c 100644
--- a/drivers/net/phy/dp83tg720.c
+++ b/drivers/net/phy/dp83tg720.c
@@ -17,6 +17,11 @@
#define DP83TG720S_PHY_RESET 0x1f
#define DP83TG720S_HW_RESET BIT(15)
+#define DP83TG720S_LPS_CFG3 0x18c
+/* Power modes are documented as bit fields but used as values */
+/* Power Mode 0 is Normal mode */
+#define DP83TG720S_LPS_CFG3_PWR_MODE_0 BIT(0)
+
#define DP83TG720S_RGMII_DELAY_CTRL 0x602
/* In RGMII mode, Enable or disable the internal delay for RXD */
#define DP83TG720S_RGMII_RX_CLK_SEL BIT(1)
@@ -154,10 +159,17 @@ static int dp83tg720_config_init(struct phy_device *phydev)
*/
usleep_range(1000, 2000);
- if (phy_interface_is_rgmii(phydev))
- return dp83tg720_config_rgmii_delay(phydev);
+ if (phy_interface_is_rgmii(phydev)) {
+ ret = dp83tg720_config_rgmii_delay(phydev);
+ if (ret)
+ return ret;
+ }
- return 0;
+ /* In case the PHY is bootstrapped in managed mode, we need to
+ * wake it.
+ */
+ return phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TG720S_LPS_CFG3,
+ DP83TG720S_LPS_CFG3_PWR_MODE_0);
}
static struct phy_driver dp83tg720_driver[] = {
--
2.39.2
