Get initial master/slave configuration, otherwise ethtool
wont be able to provide this information until link is
established. This makes troubleshooting harder, since wrong
role configuration would prevent the link start.
Fixes: cb80ee2f9bee1 ("net: phy: Add support for the DP83TG720S Ethernet PHY")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
drivers/net/phy/dp83tg720.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/dp83tg720.c b/drivers/net/phy/dp83tg720.c
index 1186dfc70fb3c..84256827a03bf 100644
--- a/drivers/net/phy/dp83tg720.c
+++ b/drivers/net/phy/dp83tg720.c
@@ -168,8 +168,12 @@ static int dp83tg720_config_init(struct phy_device *phydev)
/* In case the PHY is bootstrapped in managed mode, we need to
* wake it.
*/
- return phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TG720S_LPS_CFG3,
- DP83TG720S_LPS_CFG3_PWR_MODE_0);
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TG720S_LPS_CFG3,
+ DP83TG720S_LPS_CFG3_PWR_MODE_0);
+ if (ret)
+ return ret;
+
+ return genphy_c45_pma_baset1_read_master_slave(phydev);
}
static struct phy_driver dp83tg720_driver[] = {
--
2.39.2
