[PATCH 5.10 038/317] scsi: ufs-qcom: Fix ufs RST_n spec violation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ziqi Chen <ziqichen@xxxxxxxxxxxxxx>

[ Upstream commit b61d0414136853fc38898829cde837ce5d691a9a ]

According to the spec (JESD220E chapter 7.2), while powering off/on the ufs
device, RST_n signal should be between VSS(Ground) and VCCQ/VCCQ2.

Link: https://lore.kernel.org/r/1610103385-45755-3-git-send-email-ziqichen@xxxxxxxxxxxxxx
Acked-by: Avri Altman <avri.altman@xxxxxxx>
Signed-off-by: Ziqi Chen <ziqichen@xxxxxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Stable-dep-of: a862fafa263a ("scsi: ufs: qcom: Perform read back after writing REG_UFS_SYS1CLK_1US")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/scsi/ufs/ufs-qcom.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 08331ecbe91fb..a432c561c3df0 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -578,6 +578,17 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
 	return err;
 }
 
+static void ufs_qcom_device_reset_ctrl(struct ufs_hba *hba, bool asserted)
+{
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+	/* reset gpio is optional */
+	if (!host->device_reset)
+		return;
+
+	gpiod_set_value_cansleep(host->device_reset, asserted);
+}
+
 static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
@@ -592,6 +603,9 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 		ufs_qcom_disable_lane_clks(host);
 		phy_power_off(phy);
 
+		/* reset the connected UFS device during power down */
+		ufs_qcom_device_reset_ctrl(hba, true);
+
 	} else if (!ufs_qcom_is_link_active(hba)) {
 		ufs_qcom_disable_lane_clks(host);
 	}
@@ -1441,10 +1455,10 @@ static int ufs_qcom_device_reset(struct ufs_hba *hba)
 	 * The UFS device shall detect reset pulses of 1us, sleep for 10us to
 	 * be on the safe side.
 	 */
-	gpiod_set_value_cansleep(host->device_reset, 1);
+	ufs_qcom_device_reset_ctrl(hba, true);
 	usleep_range(10, 15);
 
-	gpiod_set_value_cansleep(host->device_reset, 0);
+	ufs_qcom_device_reset_ctrl(hba, false);
 	usleep_range(10, 15);
 
 	return 0;
-- 
2.43.0







[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux