4.19-stable review patch. If anyone has any objections, please let me know. ------------------ From: Derek Fang <derek.fang@xxxxxxxxxxx> [ Upstream commit 306b38e3fa727d22454a148a364123709e356600 ] Add an optional gpio property to control external CBJ circuits to avoid some electric noise caused by sleeve/ring2 contacts floating. Signed-off-by: Derek Fang <derek.fang@xxxxxxxxxxx> Link: https://msgid.link/r/20240408091057.14165-2-derek.fang@xxxxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- Documentation/devicetree/bindings/sound/rt5645.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt index a03f9a872a716..bfb2217a9a658 100644 --- a/Documentation/devicetree/bindings/sound/rt5645.txt +++ b/Documentation/devicetree/bindings/sound/rt5645.txt @@ -16,6 +16,11 @@ Optional properties: a GPIO spec for the external headphone detect pin. If jd-mode = 0, we will get the JD status by getting the value of hp-detect-gpios. +- cbj-sleeve-gpios: + a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2 + contacts to the ground or floating. It could avoid some electric noise from the + active speaker jacks. + - realtek,in2-differential Boolean. Indicate MIC2 input are differential, rather than single-ended. @@ -64,6 +69,7 @@ codec: rt5650@1a { compatible = "realtek,rt5650"; reg = <0x1a>; hp-detect-gpios = <&gpio 19 0>; + cbj-sleeve-gpios = <&gpio 20 0>; interrupt-parent = <&gpio>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; realtek,dmic-en = "true"; -- 2.43.0
