Re: [PATCH v2] Bluetooth: qca: Fix BT enable failure again for QCA6390 after warm reboot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/06/2024 03:49, Lk Sii wrote:
> 
> 
> On 2024/6/4 23:18, Krzysztof Kozlowski wrote:
>> On 04/06/2024 16:25, Lk Sii wrote:
>>>
>>>
>>> On 2024/5/22 00:02, Krzysztof Kozlowski wrote:
>>>> On 16/05/2024 15:31, Zijun Hu wrote:
>>>>> Commit 272970be3dab ("Bluetooth: hci_qca: Fix driver shutdown on closed
>>>>> serdev") will cause below regression issue:
>>>>>
>>>>> BT can't be enabled after below steps:
>>>>> cold boot -> enable BT -> disable BT -> warm reboot -> BT enable failure
>>>>> if property enable-gpios is not configured within DT|ACPI for QCA6390.
>>>>>
>>>>> The commit is to fix a use-after-free issue within qca_serdev_shutdown()
>>>>> by adding condition to avoid the serdev is flushed or wrote after closed
>>>>> but also introduces this regression issue regarding above steps since the
>>>>> VSC is not sent to reset controller during warm reboot.
>>>>>
>>>>> Fixed by sending the VSC to reset controller within qca_serdev_shutdown()
>>>>> once BT was ever enabled, and the use-after-free issue is also fixed by
>>>>> this change since the serdev is still opened before it is flushed or wrote.
>>>>>
>>>>> Verified by the reported machine Dell XPS 13 9310 laptop over below two
>>>>> kernel commits:
>>>>
>>>> I don't understand how does it solve my question. I asked you: on which
>>>> hardware did you, not the reporter, test?
>>>> It seems Zijun did NOT perform any tests obviously.
>>> All these tests were performed by reporter Wren with her machine
>>> "Dell XPS 13 9310 laptop".
>>
>> Wren != Zijun.
>>
>>>
>>> From previous discussion, it seems she have tested this change
>>> several times with positive results over different trees with her
>>> machine. i noticed she given you reply for your questions within
>>> below v1 discussion link as following:
>>>
>>> Here are v1 discussion link.
>>> https://lore.kernel.org/linux-bluetooth/d553edef-c1a4-4d52-a892-715549d31ebe@xxxxxxx/T/#m7371df555fd58ba215d0da63055134126a43c460
>>>
>>> Here are Krzysztof's questions.
>>> "I asked already *two times*:
>>> 1. On which kernel did you test it?
>>> 2. On which hardware did you test it?"
>>>
>>> Here are Wren's reply for Krzysztof's questions
>>> "I thought I had already chimed in with this information. I am using a
>>> Dell XPS 13 9310. It's the only hardware I have access to. I can say
>>> that the fix seems to work as advertised in that it fixes the warm boot
>>> issue I have been experiencing."
>>
>> I asked Zijun, not Wren. I believe all this is tested or done by
>> Qualcomm on some other kernel, so that's my question.
>>
> Zijun is the only guy from Qualcomm who ever joined our discussion,
> he ever said he belongs to Bluetooth team, so let us suppose the term
> "Qualcomm" you mentioned above is Zijun.
> 
> from discussion history. in fact, ALL these tests were performed by
> reporter Wren instead of Zijun, and there are also NOT Zijun's Tested-by
> tag, so what you believe above is wrong in my opinion.

Patch author is supposed to test the code. Are you implying that
Qualcomm Bluetooth team cannot test the patch on any of Qualcomm
Bluetooth devices?

> 
> Only Zijun and reporter were involved during those early debugging days,
> Zijun shared changes for reporter to verify with reporter's machine,
> then Zijun posted his fixes after debugging and verification were done.
> 
>> That's important because Wren did not test particular scenarios, like
>> PREEMPT_RT or RB5 hardware, but Zijun is claiming problems are solved.
>> Maybe indeed solved, but if takes one month and still not answer which
>> kernel you are using, then I am sure: this was nowhere tested by Zijun
>> on the hardware and on the kernel the Qualcomm wants it to be.
>>
>>>
>>>>> commit e00fc2700a3f ("Bluetooth: btusb: Fix triggering coredump
>>>>> implementation for QCA") of bluetooth-next tree.
>>>>> commit b23d98d46d28 ("Bluetooth: btusb: Fix triggering coredump
>>>>> implementation for QCA") of linus mainline tree.
>>>>
>>>> ? Same commit with different hashes? No, it looks like you are working
>>>> on some downstream tree with cherry picks.
>>>>
>>> From Zijun's commit message, for the same commit, it seems
>>> bluetooth-next tree has different hashes as linus tree.
>>> not sure if this scenario is normal during some time window.
>>>> No, test it on mainline and answer finally, after *five* tries, which
>>>> kernel and which hardware did you use for testing this.
>>>>
>>>>
>>> it seems there are two issues mentioned with Zijun's commit message.
>>> regression issue A:  BT enable failure after warm reboot.
>>> issue B:  use-after-free issue, namely, kernel crash.
>>>
>>> @Krzysztof
>>> which issue to test based on your concerns with mainline tree?
>>
>> No one tested this on non-laptop platform. Wren did not, which is fine.
>> Qualcomm should, but since they avoid any talks about it for so long
>> (plus pushy comments during review, re-spinning v1 suggesting entire
>> discussion is gone), I do not trust their statements at all.
>>
> 
> For issue A:
> reporter's tests are enough in my opinion.
> Zijun ever said that "he known the root cause and this fix logic was
> introduced from the very beginning when he saw reporter's issue
> description" by below link:
> https://lore.kernel.org/lkml/1d0878e0-d138-4de2-86b8-326ab9ebde3f@xxxxxxxxxxx/
> 
>> So really, did anything test it on any Qualcomm embedded platform?
>> Anyone tested the actual race visible with PREEMPT_RT?
>> For issue B, it was originally fixed and verified by you,
> it is obvious for the root cause and current fix solution after
> our discussion.
> 
> luzi also ever tried to ask you if you have a chance to verify issue B
> with your machine for this change.

I tried, but my setup is incomplete since ~half a year and will remain
probably for another short time, depending on ongoing work on power
sequencing. Therefore I cannot test whether anything improves or
deteriorates regarding this patch.

> 
>> Why Zijun cannot provide answer on which kernel was it tested? Why the
>> hardware cannot be mentioned?
>>
> i believe zijun never perform any tests for these two issues as
> explained above.

yeah, and that was worrying me.

Best regards,
Krzysztof





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux