Hello Chen-Yu,
On 2024-05-29 18:27, Chen-Yu Tsai wrote:
On Tue, May 21, 2024 at 1:20 AM Dragan Simic <dsimic@xxxxxxxxxxx>
wrote:
Correct the specified regulator-min-microvolt value for the buck
DCDC_REG2
regulator, which is part of the Rockchip RK809 PMIC, in the Pine64
Quartz64
Model B board dts. According to the RK809 datasheet, version 1.01,
this
regulator is capable of producing voltages as low as 0.5 V on its
output,
instead of going down to 0.9 V only, which is additionally confirmed
by the
regulator-min-microvolt values found in the board dts files for the
other
supported boards that use the same RK809 PMIC.
This allows the DVFS to clock the GPU on the Quartz64 Model B below
700 MHz,
all the way down to 200 MHz, which saves some power and reduces the
amount of
generated heat a bit, improving the thermal headroom and possibly
improving
the bursty CPU and GPU performance on this board.
This also eliminates the following warnings in the kernel log:
core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000,
not supported by regulator
panfrost fde60000.gpu: _opp_add: OPP not supported by regulators
(200000000)
core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000,
not supported by regulator
panfrost fde60000.gpu: _opp_add: OPP not supported by regulators
(300000000)
core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000,
not supported by regulator
panfrost fde60000.gpu: _opp_add: OPP not supported by regulators
(400000000)
core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000,
not supported by regulator
panfrost fde60000.gpu: _opp_add: OPP not supported by regulators
(600000000)
Fixes: dcc8c66bef79 ("arm64: dts: rockchip: add Pine64 Quartz64-B
device tree")
Cc: stable@xxxxxxxxxxxxxxx
Reported-By: Diederik de Haas <didi.debian@xxxxxxxxx>
Signed-off-by: Dragan Simic <dsimic@xxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
index 26322a358d91..b908ce006c26 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
@@ -289,7 +289,7 @@ vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <900000>;
+ regulator-min-microvolt = <500000>;
The constraints here are supposed to be the constraints of the
consumer,
not the provider. The latter is already known by the implementation.
So if the GPU can go down to 0.825V or 0.81V even (based on the
datasheet),
this should say the corresponding value. Surely the GPU can't go down
to
0.5V?
Can you send another fix for it?
I can confirm that the voltage of the power supply of GPU found inside
the RK3566 can be as low as 0.81 V, according to the datasheet, or as
low as 0.825 V, according to the GPU OPPs found in rk356x.dtsi.
If we want the regulator-min-microvolt parameter to reflect the
contraint
of the GPU as the consumer, which I agree with, we should do that for
other
RK3566-based boards as well, and almost surely for the boards based on
the
RK3568, too.
This would ensure consistency, but I'd like to know are all those
resulting
patches going to be accepted before starting to prepare them? There
will
be a whole bunch of small patches.
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
